Just for fun...

[tekzilla41]

While I await the final parts for my new rig, I want to see what my window case will look like with all the led fans going. Can I power up the psu with just the fan controller and the 4 fans hooked up (nothing else plugged in), or will this cause some problems?

 

[phisrow]

I wouldn't do it for extended periods, just on principle; but there should be no problem for a modern, decently built, power supply. Just hook things up, then short the green wire to ground.

 

[TheNewGuy8]

ya, bend a paper clip and stick one in the green plug and one in the black, I think, which is ground.

 

[JMWarren]

If you've got some optical drives or somthing else I'd add them. The PSU may not be too happy running with such a little load.

 

[Jiggz]

Yes you can do it. Go for it.

 

[seanp789]

Use a paperclip to connect PIN4 and PIN6.

Koolance actually tell you how to do it with a picture in this manual. http://www.koolance.com/support/files/manual_univ_v200eng_d.zip

Manual is written for a 20Pin PSU same rules apply for a 24pin.