• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Japanese voltage 100 volt with 50 hz cycle.

techs

Lifer
Japan, according to the internet, uses 100 volts instead of the USA's 120 volt. Plus parts of Japan use 50 hz instead of the USA's 60 hz.
Can I safely use my laptop power adapter with out a voltage converter?
Thanks.
 
The power adapter would be all like "Woah, what the ****** is this? 120V? ****** that, I'm leaving!"

But perhaps not, I have a Japanese headphone amp that's apparently 50/60Hz capable. Might have been tweaked to comfortably support a higher voltage however. When you consider that the adapter has to consider some level of voltage fluctuation, it's not unreasonable to assume a good chance it could handle 120V.

If it were me, I'd try it.
 
I have done it without problem with a laptop.

Virtually all laptop power supplies can handle a range of voltages and either 50 or 60 Hz. But, do check the stats on your personal power supply (mine all say the stats it can handle right there on the bottom of the power supply). One thing to remember, is that 3 prong plugs (with the ground) are quite rare in Japan. You probably will be able to find one, but there is a chance that you might not have access to one. So bring a 3-prong to 2-prong adapter just in case.
 
depends. on some things yes. but for example, my mom had this Kitchen Aid Artisan Mixer in the US. we couldn't take it back to israel cause here it's 50hz and it will damage the motor. check although sometimes it can screw up clocks and things like that. most likely it can, just look at the adaptor.

for example, when i brought my computer to israel, all i had to do was change the switch to 220. just make sure that your adaptor can handle it.
 
when you are on the trains from a 50hz to a 60 hz region, the lights go out for about half a second as the train switches to the other electrical gear. it's crazy but their trains have systems for both.
 
Back
Top