Is this possible?!?!?!?

[st34lth]

According to SpeedFan, my voltage values are as follows :

Vcore1 = 1.41V
+3.3V : 3.25 (OK)
+5V : 4.94 (Little low)
+12V : 11.78 (little low)
-12V : -1.75 WTf?!?!?!
-5V : -8.78
+5V : 4.92

I have been experiencing some system lockups recently where my right monitor will go blank and then go into power save and then the system will lockup - thoughts?

My specs are as follows -

a8n-sli mobo
AMD 64 3200+
Leadtek 6600GT card
2X 1gb PDP 2-64x64 PC3200 RTL
Antec TruePower True550 EPS12V 550W (38A on the +12V)

 

[st34lth]

I should mention I am running 4x 250GB 7200 drives along with 2x 36GB 10K drives

 

[D1gger]

Software tools for measuring voltages are notoriously inaccurate. Asusprobe tells me I have 11.31 on me +12V rail, but in bios it shows as 11.98. I would be sceptical of any software readings.

 

[st34lth]

Hmm. ... I was hoping I would get somethin gthat could explain these crashes... they just started and are REALLY starting to annoy

 

[Oyeve]

You might have a loose molex somewhere. Happened to me once, system kept crashing, locking up, et..al. Turns out the molex was loose on my main HD.

 

[Demonicon]

Your voltages all look fine to me, though a decent digital multimeter could put your doubts to rest. The -12 isn't used by your system at all, so don't worry about that.

As for your issue, are you overclocking? If not, check all your connections. Also, disable all the windows power options like turn off hard drive after x or monitor after x.

 

[st34lth]

It actually hasnt happened again and it had happened 3 times in a row since I had written this. I think the problem is with the Keyhole sat image viewer?

 

[piasabird]

Seems like that many drives would generate a lot of heat.