Is this an ok CPU bench for a 1.9Ghz?

[WA261]

Sandra bench

 

[XBoxLPU]

How are the temps with that HSF, with that much of an OC ?

 

[WA261]

air on in the house, so it is nice and cool....just cleaned the sink and put new as2 on.....temp is idle at 42c

 

[WA261]

why wont that link work????

 

[XBoxLPU]

It is like Geocities.. no direct linking. Copy address and hit enter ....

Nice score, better than my current OCed cpu...

 

[WA261]

you have a nw at 2300, and this tops it?....hmmmmmmm

 

[DAPUNISHER]

Isn't that the older version of Sandra your running? I would also like to see your Multimedia and bandwidth benchies Nice O/C BTW and I dig your case!

 

[RamIt]

Better than my 1.6@2500. Post some more benches.
Dhrystone-5000
whetstone-fpu/isse2 - 1341/3133

Cut and paste http://www.theforumisdown.com/uploadfiles/061602/cpu.jpg

 

[WA261]

i have noticed it is better than a lot of the 1.6a @ 2400/2500+

gotta love AMD =P

will get updated sandra and post more benches

 

[XBoxLPU]

I shall have AMD Benchmarks by july ..... i will post some benchmarks comparing my intel system and the new AMD rig...

 

[Pabster]

Synthetic benchies != Real world performance. Keep that in mind.

AthlonXP @ 1.9GHz posts impressive Sandra scores, yet falls behind a 2.4/2.53 quite easily, with a couple exceptions.

 

[WA261]

AthlonXP @ 1.9GHz posts impressive Sandra scores, yet falls behind a 2.4/2.53 quite easily, with a couple exceptions.

can you point me to the site that shows a 1.9 against a 2.4.2.53? i have been searching all over... =)

 

[RamIt]

Originally posted by: WA261

AthlonXP @ 1.9GHz posts impressive Sandra scores, yet falls behind a 2.4/2.53 quite easily, with a couple exceptions.

can you point me to the site that shows a 1.9 against a 2.4.2.53? i have been searching all over... =)

You have shown one bench. Lets make it this site and post some more benches and I will post some too.
Here goes my radeon comparison to yours. P4@2456
That 1.9 should post very impressive numbers in 3DMark.

 

[WA261]

actually....i cant never seem to be able to run 3dmark...it always locks on me....no matter if my card is at stock speed or not.....wonder if i screwed it up oc'ing it to much....

also...we would need the same type video cards to be able to compare 3dmark scores..

 

[DAPUNISHER]

Have you tried it with the CPU at default speed/voltage? Perhaps your overclock isn't completely stable as 3Dmark is a good one for nuking an unstable overclock.

 

[SSXeon5]

Originally posted by: DAPUNISHER
Have you tried it with the CPU at default speed/voltage? Perhaps your overclock isn't completely stable as 3Dmark is a good one for nuking an unstable overclock.

Thats true sometimes people just run a few of the tests and that shows signs of unstability. I think its cheating kinda .... i mean when u run fewer benchies you CAN get a better score. So i will only base REAL scores if all the tests are done

SSXeon