so I got a 1075t chip and have been fiddling with it all day.
it can almost reach 3.7ghz on stock vcore but has trouble, it needs about 2 bumps up from stock to stabilize, otherwise 3.6 is the best youll get on stock voltage. 1.35v will get you 3.7.
1.425v will get you 3.8, then you need another .25 volts to get it stable. but also much higher temps along with it. my pc shut down while stressing it on intel burn test, how sad. temps hovered around 58-62c.
i cant get the board to post @ 4.0 and its either the board, the chip, or the ram.
mind you i'm using a 630w dual 12v rail(18,16 amps on the rails) psu and corsair XMS3 1333 ram til i get the ripjaws + xfx psu in the mail. the xfx is the 850w black edition with 70 amps on the 12v single rail.
annoying thing about these chips is that the voltage field is simply far too low, i barely had any room and i'm already at the recommended max voltage. ridiculous. running NB-CPU @ x7-1869mhz to eliminate the possibility of instability caused by IMC. memory is clocked @ 1068mhz
other voltages are 1.61 dram voltage, 1.21 NB voltage, and 1.35 CPU NB...weak. is there anything i can do? could my psu be too weak to handle it? its a raidmax volcano 630w.
mobo is ga-890fxa-ud5
it can almost reach 3.7ghz on stock vcore but has trouble, it needs about 2 bumps up from stock to stabilize, otherwise 3.6 is the best youll get on stock voltage. 1.35v will get you 3.7.
1.425v will get you 3.8, then you need another .25 volts to get it stable. but also much higher temps along with it. my pc shut down while stressing it on intel burn test, how sad. temps hovered around 58-62c.
i cant get the board to post @ 4.0 and its either the board, the chip, or the ram.
mind you i'm using a 630w dual 12v rail(18,16 amps on the rails) psu and corsair XMS3 1333 ram til i get the ripjaws + xfx psu in the mail. the xfx is the 850w black edition with 70 amps on the 12v single rail.
annoying thing about these chips is that the voltage field is simply far too low, i barely had any room and i'm already at the recommended max voltage. ridiculous. running NB-CPU @ x7-1869mhz to eliminate the possibility of instability caused by IMC. memory is clocked @ 1068mhz
other voltages are 1.61 dram voltage, 1.21 NB voltage, and 1.35 CPU NB...weak. is there anything i can do? could my psu be too weak to handle it? its a raidmax volcano 630w.
mobo is ga-890fxa-ud5