Irritating and odd memory issue

[IrishNinja64]

Mobo: Abit AN8 32X
Mem1: Corsair TwinX1024-3200XL, upto 2.75v verified by Corsair

Adding Mem2: OCZ EL DDR PC-3200 Dual Channel Platinum(OCZ4001024ELDCPE-K), upto 2.8v verified by OCZ

I'm currently running 2.7v (+0mv) @ 4 Beats Burst, Continuous MTRR map, enabled bank interleaving, and 2T command. This is to try and get this stable.

Corsair SPD detrected as:
tCL: 2.0
tRC: 11
tRFC: 14
tRAS: 5
tRCD: 2
tRP: 2
tRRD: 2
tWR: 3
tWTR: 2
tRTW: 3

OCZ SPD detected as:
tCL: 3.0
tRC: 12
tRFC: 14
tRAS: 8
tRCD: 4
tRP: 4
tRRD: 2
tWR: 3
tWTR: 2
tRTW: 4

My timings are currently set to the OCZ looser timings, which seem to get me the most application stable at the moment, trying to play a game crashes though, or anything that is even slightly more memory intensive beyond Internet Explorer. I tried tightening the timings up a little but got blue screens.

I'm wondering if anone knows anything confirmed about these two memory sets not playing well together or have any suggestions for timings. I'd really like to get 2GB of memory functional on my system.

 

[IrishNinja64]

Additional info.
When all modules are installed, the SPD detects as the following:
tCL: 2.5
tRC: 7
tRFC: 9
tRAS: 5
tRCD: 2
tRP: 2
tRRD: 2
tWR: 2
tWTR: 1
tRTW: 4

Very odd that the timings get MUCH tighter when allowing it to go by SPD/Auto.