INWIN

[tkim]

anyone like their cases? i hear you guys talk about other brands a lot but not this one. i thought or i assumed it to be one of the better ones. any feedback would help.

 

[Zipperhead]

very good case

 

[mechBgon]

I have a couple, I think they're ok. Steer clear of the A-series (A500 and so on). The S500 is their better mid-tower and their Q500 is a fairly nice full tower, although a lot of people are liking the Antec 1030SX for its four 80mm fan positions. The Inwins are pretty sturdy cases and make a good starting point for modifications like blowholes.

Which one are you thinking about?

 

[tkim]

well...i was thinking about the s508iw. not sure if that's right. anyhow, it has the 300w...oh by the was, some 300w power supplies have different spec. # + # = 300w. what's the difference. aren't all 300 watters the same. it's actually p4 approved and to tell you the truth i don't even know if that makes a difference. any suggestions?

 

[mopar360]

I have the S506, same as S500 with cooler front panel( well it my opinion) and its great, cools very well with an 80mm fan in front and back. But I went to a 92mm Panaflow up front to quiet it down and gain more airflow( had to cut the hole bigger) The only down fall is that the panels are all metal exept for the front bezel so it transfers a little more noise than some others with plastic side and top covers but its not bad by any means. This was the first system I've built and the case was very easy to work with.