Intel P4 CPU Temp Poll

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
Toggle sidebar Toggle sidebar
S

smahoney

Senior member
Apr 8, 2003
278
0
0
P4 2.8C M0 @ 3.6GHz 257MHz 1.55V
Corsair Hydrocool 200 E

Idle: 32C
Load: 42C - 1 hour Prime95

At Stock speed and core:
Idle: 31C
Load: 40C - 1 Hour Prime95

WB Temps:
Idle: 28.5C
Load: 30C

Room Temp 22C - 72F
 
S

sxftdeep

Senior member
Feb 2, 2004
255
0
0
Intel Pentium 4 2.8C @ 3.5GHz

Idle ~40C
Load ~63C

Abit IC7 revision 1.1
Intel heatsink/fan solution (the one with the copper insert)
Arctic Silver 5
Lian Li PC61
 
W

wkabel23

Platinum Member
Dec 7, 2003
2,505
0
0
Pentium 4 2.8C @ 3.0GHz (for now :eek:)
Retail HSF w/ AS5
Abit IC7

-36.0C idle/60.0C load according to AbitEQ.
 
U

Unforgiven

Golden Member
May 11, 2001
1,827
0
0
p4 2.6c
~35 C idle
~45 C full load

Retail Heatsink
P4C800 Deluxe
*temps taken with asus probe
 
I

im2good4u

Member
Mar 11, 2004
93
0
0
rearanged and improved airflow in the chassis and added a fan on the NB heatsink. got lower temps now @ stock HSF :)
CPU/MOBO 48/35night 49/38noon 33/33idle
 
F

futuristicmonkey

Golden Member
Feb 29, 2004
1,031
0
76
You people have some crazy temps, but then again, your processors are like a million times better than mine. Anyways, P4 Celeron 17.@2.06 Idle: CPU/NB : 21/23, 100%Load: 39/28.


I have two 80mm intake fans in the front of my case, a Zalman intake fan on the side (its a video card fan, I think I bought it becasue of its little noise but, I'm nuts) and a Thermaltake Smart Case Fan 2 as an exhaust for the CPU only which is regulated by the thermal sensor that came with it. I put the sensor between the fins of my CPU's heatsink. The problem with the sensor is that it increases the speed of my fan after it starts to get hot. If I controlled the speed of the fan (and put it on max), not only would it sound like a damn hair dryer, my Load temp would be a few degrees cooler. Also, those temps are cool because of the cheap ducting job I did. Long story short, I reversed the CPU's fan to blow air away from it into a tube I made out of a 2L coke bottle where the hot air is directly exhausted from my system by the Thermaltake fan. If you saw it, you'd laugh, but hey, it works.
 
G

Gurck

Banned
Mar 16, 2004
12,963
1
0
p4 2.6 stock speed, stock HSF but paste instead of the pad, 38-41c idle, 55c load
 
S

Somniferum

Senior member
Apr 8, 2004
353
0
71
P4 2.4B @ 2.7GHz w/stock Intel heatsink/fan (thermal pad) and 2 Antec case fans

28-32C Idle
46-50C Load

System temperature stays ~30C

On days when the ambient temp is exceptionally hot, these numbers go up by 2-3 degrees.
 
Freejack2

Freejack2

Diamond Member
Dec 31, 2000
7,751
8
91
2.6c @ 3.2
Idle 30-32c
Load 55c
The load temp will probably drop a little once the Arctic Silver settles.
 
C

coreano

Junior Member
Apr 23, 2002
24
0
66
P4 3.2c
Idle: 41C
Load: 53C

ASUS P4C-800e Dlx
Swiftech MCX-478Vw/92mm SilenX
AS5
Lian-li PC6070
 
D

dp004i

Golden Member
Apr 24, 2001
1,872
0
0
Intel P4 2.4C @ 3.2 with Zalman 7000Cu
Idle: 42
Load: 60
Case temp: 38
The mobo is Abit IS7-G, so the real temps are probably about 10 degrees lower
 
bob4432

bob4432

Lifer
Sep 6, 2003
11,726
45
91
i just switched to this CoolerMaster and then added a 92mm enermax fan - ~3000rpm=60+cfm and my temps are now 36-37C idle, case 32C and full load is <50C. i had to get a 70->92mm adapter and use the old 70mm fan body as a spacer so it is kind of a pain in the @$$ to use this setup, but it did drop my temps pretty good.
 
M

Mullzy

Senior member
Jan 2, 2002
352
0
0
Intel P4 2.8C Stock with Zalman 7000AlCu
Idle: 44C
Case: 30C

Abit IC7 -- hopefully that temp is at least 5C high?

This was 3 minutes after the first bootup... 4 hours later my CPU or mobo was dead so no solid numbers after AS5 set in.

:(
 
M

Margalus

Member
Oct 28, 2003
118
0
0
Originally posted by: coreano
Just trying to see where my temps fall in comparison to other peeps...thx!

P4 3.2c
Idle: 47C
Load: 65C

ASUS P4C-800e Dlx
Thermalright SP-94 w/80mm Papst 8412 NGLE fan
AS3
Lian-li PC6070

My temps seem a little on the high side...any tips appreciated :confused:
Click to expand...


you have big problems. that should be around 30c idle and 40c load with that heatsink. My prescott at 3.6ghz with an slk-900 and 2500rpm fan never went above 50C with 100% load. My 3.2EE @ 3.7ghz with the sp-94 idles around 34C and hits 42C max under full load.
 
bob4432

bob4432

Lifer
Sep 6, 2003
11,726
45
91
Originally posted by: Margalus
Originally posted by: coreano

Just trying to see where my temps fall in comparison to other peeps...thx!



P4 3.2c

Idle: 47C

Load: 65C



ASUS P4C-800e Dlx

Thermalright SP-94 w/80mm Papst 8412 NGLE fan

AS3

Lian-li PC6070



My temps seem a little on the high side...any tips appreciated :confused:
Click to expand...





you have big problems. that should be around 30c idle and 40c load with that heatsink. My prescott at 3.6ghz with an slk-900 and 2500rpm fan never went above 50C with 100% load. My 3.2EE @ 3.7ghz with the sp-94 idles around 34C and hits 42C max under full load.
Click to expand...

what are your room temps?

 
C

coreano

Junior Member
Apr 23, 2002
24
0
66
Originally posted by: Margalus
Originally posted by: coreano Just trying to see where my temps fall in comparison to other peeps...thx! P4 3.2c Idle: 47C Load: 65C ASUS P4C-800e Dlx Thermalright SP-94 w/80mm Papst 8412 NGLE fan AS3 Lian-li PC6070 My temps seem a little on the high side...any tips appreciated :confused:
Click to expand...
you have big problems. that should be around 30c idle and 40c load with that heatsink. My prescott at 3.6ghz with an slk-900 and 2500rpm fan never went above 50C with 100% load. My 3.2EE @ 3.7ghz with the sp-94 idles around 34C and hits 42C max under full load.
Click to expand...

Idles at 34C!?..*whoa*..I just changed heatsinks to a Swiftech MCX-478V with a 92mm SilenX fan (9dB)and some AS5. I got my CPU temp down to 41C idle now. Wonder what I'm doing wrong...hmm...mind telling me what your using with theSP-94?

TIA :confused:
 
M

Margalus

Member
Oct 28, 2003
118
0
0
Originally posted by: coreano
Wonder what I'm doing wrong...hmm...mind telling me what your using with the SP-94?

TIA :confused:
Click to expand...


two things. first I am using an enermax adjustable 92mm fan @2500rpm. second, as5 can cause big problems. If it is not applied exactly right it can cause your temps to be much higher than they should be. I recommed either as3 if you can still find some or ceramique if not. I have as3 on there now.
 
M

Margalus

Member
Oct 28, 2003
118
0
0
well I actually hadn't seen an idle temp in quite a while(run 2 instances of seti 24/7), so I thought it was 34C. I just turned off both seti programs and let the computer sit for 15minutes while I browsed the web. It is now at 30C while I type this ;)
 
D

daba

Senior member
Mar 27, 2004
836
0
0
P4 3.0c @ 3.6
P4P800-dlx
sp-94 with thermaltake smart case fan 92mm (78cfm)
AS5

Fresh from MBM5:

Idle: 25C
Load: 37C

:) (Not a typo)!
 
J

jhurst

Senior member
Mar 29, 2004
663
0
0
Come on guys.....this poll is pointless. It needs to be broken down my MB. Asus under-temps and Abit way over-temps. Abit can actually over-temp by up to 20C (at load). I'll try to find the article one day, but there is a much bigger difference than just a standard ~5C. Asus on the other hand under-temps actual temps.

Should have been done "Intel P4 CPU on Abit MB Temp Poll"
and "Intel P4 CPU on Asus MB Temp Poll"

This assuming that everyone is still using the 2 best 875 boards out.

P.S.

Idle: 39C
Load: 53C
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom