News Intel GPUs - Battlemage IGP benchmarks are here

Page 45 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

gdansk

Diamond Member
Feb 8, 2011
3,145
4,944
136
I find it interesting that their improved drivers for Xe-Hp are indicated as having improvements to the Xe-LP products, and that the XeSS tech can use the DP4a units on the Xe-LP to also successfully upscale. I hope that someone takes the time to see if the 80/96eu parts in Tiger Lake benefit from these improvements enough to put some distance between them and Vega8 in the Cezanne. It'll also be interesting to see how Cezanne and TigerLake work at 900p -> 1080p upscaling an higher detail settings.
And Vega could do FSR too, for a more balanced comparison, right?
 
Last edited:

uzzi38

Platinum Member
Oct 16, 2019
2,705
6,427
146
Linked image is a summary of supported GPUs courtesy of @stebler (I'm on my phone so I can't check if this is the actual account or if it was capital S, sorry if it's wrong).

Just going to add in that Series X can also support where the PS5 can't, unless Intel do another version that works with FP16.
927603bb3a1b66a836c470140fd96576.jpg
 

mikk

Diamond Member
May 15, 2012
4,258
2,331
136
die size calculation from tomshardware:

We've drawn lines to show how large the chips are, and based on our calculations; it looks like the larger Xe HPG die will be around 24x16mm (~384mm^2), give or take 5–10% in each dimension. We counted the dies on the wafer as well, and there appear to be 144 whole dies, which would also correlate to a die size of around 384mm^2.
 
  • Like
Reactions: lightmanek

KompuKare

Golden Member
Jul 28, 2009
1,198
1,510
136
Anyone have any idea how much TSMC charges for 6nm wafers?
Nearly 400mm² should give around 100 fully functioning dies per wafer. $10k would make each such die costs around $100.
 

uzzi38

Platinum Member
Oct 16, 2019
2,705
6,427
146
Anyone have any idea how much TSMC charges for 6nm wafers?
Nearly 400mm² should give around 100 fully functioning dies per wafer. $10k would make each such die costs around $100.
Not exact numbers, but $/Tr is flat vs N7. Slightly costlier, but difference is more or less made up by smaller dies (and thus more dies per wafer).
 

KompuKare

Golden Member
Jul 28, 2009
1,198
1,510
136
Not exact numbers, but $/Tr is flat vs N7. Slightly costlier, but difference is more or less made up by smaller dies (and thus more dies per wafer).
I guess the simplicity of nearly exactly 100 good dies is that $10k makes them $100 each, $15k makes them $150 each, etc.
Might give us an idea on how low Intel could price if they want to be disruptive.
 

jpiniero

Lifer
Oct 1, 2010
15,311
5,836
136
Doesn't sound like DG2 is approaching RTX 3060/Ti only, I'm definitely expecting at least RTX 3070 level of performance.

From the quote they are talking about PV. At least on paper it does sound like it could be very competitive with Hopper.
 

Mopetar

Diamond Member
Jan 31, 2011
8,145
6,843
136
I don't think there's too much doubt that Intel could make a decent compute focused GPU, but there's always been some doubt regarding gaming since that requires a lot more software support and that's going to take time.
 

andermans

Member
Sep 11, 2020
151
153
76
Lots of ROPs and TMUs compared to Navi 22. Definitely 1440p+ cars.

The TMU per FP32 unit is actually the same as the Navi22 card, and the Ampere card has half that (consequence of doubling the number of FP32 Units per SM?).
 

IntelUser2000

Elite Member
Oct 14, 2003
8,686
3,786
136
For Ampere it's not much as it halved the TMU/ROP, but the other way around, by doubling FP32 without increasing others.
 
Last edited:

Stuka87

Diamond Member
Dec 10, 2010
6,240
2,559
136
Lots of ROPs and TMUs compared to Navi 22. Definitely 1440p+ cars.

We have no way of actually knowing that as we do not know how these ROPs or TMU perform. We already know that this is a bit different between nVidia and AMD.

Overall, the numbers are cool to see, and give us a better idea as to what to expect. But at the same time, we also dont really know what to expect as we lack something to compare them to.
 
Last edited:
  • Like
Reactions: Mopetar

LightningZ71

Golden Member
Mar 10, 2017
1,836
2,214
136
And Vega could do FSR too, for a more balanced comparison, right?

Well, after some mild research, it appears that DP4A is a requirement of SM 6.4
Vega 8 in Renoir, Lucienne, and Cezanne all support SM 6.4 (they were supposedly derived from the existing 7nm design for Radeon7/VEGA 20)

Since Tiger Lake and Vega 8 will both be using the DP4A fallback mode, it's going to be interesting to see how their performance compares using the same mode.
 

xpea

Senior member
Feb 14, 2014
451
153
116
The GPU shortage is expected to persist well into next year. Unfortunately, as Intel is using TSMC, don’t expect retail availability to improve much.
yeah these will be sold out immediately. A small chunk of TSMC N6 capacity is totally unable to meet the demand...
 

Hitman928

Diamond Member
Apr 15, 2012
6,357
11,326
136
The leaker also being surprised by the size, seems close to 400mm2, that's what I could tell......

The rumored die size is bigger than the reticle limit, so the chances of it being accurate are pretty much 0%. Obviously makes the rest of the info hard to trust as well.