Integrated Drive Bay - How to Install?

[ktchong]

I bought a case that has a integrated 3-1/4" drive bay. How ? I removed my floppy drive from my old case, removed the drive's front panel, and tried to installed it onto my new case. However, the eject button on the integrated drive bay didn't fit the one on the drive. The position of the eject button on the drive bay seemed to be off.

Do I need a particular type of drive for the integrated drive bay? Or is there a special way to install it?

 

[fast_eddie]

Ask the people that sold you the case what type/brand of floppy drive that the case was designed to mount.

 

[moolman]

Well, usually if should just fit, every case I've seen with an integrated 3.25 bay is setup by placing the floppy with the front panel intact into the slot. Push it against the eject button of the case to make sure it works, and screw in. If not you got a weird case, I would check carefully because floppy drives are pretty universal.

Alex

 

[ktchong]

I have just found out what the problem was. I wasn't supposed to removed the front panel. Thanks for all your responses.