Integra jack points?

[puffpio]

What are the jack points for the integra? I can't fit my head under the car to see where I can jack it up safely

 

[amdskip]

Is there a frame or is it a unibody?

 

[Sluggo]

<< I can't fit my head under the car to see where I can jack it up safely >>


Another good reeason to drive an SUV

Isnt there anything in the manual?

 

[Soybomb]

Are you talking about the little scissor jack that comes with the car? If so might I recommend you feel around the rocker panels for bumps to line up with, but most importantly read the owners manual, it will tell you.

If you're using a floor jack, use something solid. You should know what solid is if you've got a floor jack.

Either way remember not to get under the car unless you have it supported by jackstands!

 

[amdskip]

Just don't jack it up using the gas tank

 

[Aenygma]

RTFM.

 

[NutBucket]

There should be 4 jack points for the &quot;scissors&quot; near the wheels, one behind each of the fronts, one in front of each of the rears. If you want to lift the front or rear ends, there *should* be a cross member running front to back up front, use that. In the rear, look for the rear cross member running between the suspension arms. You can also check out the Chilton's manual for your car for more info. What I've told you is based somewhat on experience and somewhat on speculation. I take no responsibility for any damage you inflict on yourself or your car.

 

[JohnnyKnoxville]

Hmm you can always dig a hole and crawl inside of it ,and have a friend drive your car over the hole.

 

[Soybomb]

Johnny digging is too much work, the proper way is to stack some cinder blocks up in stacks up 2-3 high, then use 2x4's as ramps and you've got a car workin' on platform