• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Installing wheels on my case

T

The Linuxator

Banned
So after looking at the possible little additons that I can add to my Aspire X-Infinty case I am considerinf adding these to them : link
Yes I am talking about the Lian-Li wheels, it shouldn't be a hard mod right ? But I am not sure about how they attach to Lian cases, don't they have a couple of holes and are fixed using two screws or is it one big screw ?
 
Easiest/cheapest way........Cut out a piece of 3/4" thick wood the exact size as the bottom of your case. Buy four metal swivel carpet casters that attach to the wood with four little screws each.

You can attach this rolling platform to the case with four screws from the inside, using the holes in the case from the original rubber feet.

This works perfect...rolls easily over all surfaces, and adds enough weight to the bottom of the case to improve stability.

If you have bottom air intakes in your case, you can cut holes in the wood platform to match.
 
Originally posted by: Bluefront
Easiest/cheapest way........Cut out a piece of 3/4" thick wood the exact size as the bottom of your case. Buy four metal swivel carpet casters that attach to the wood with four little screws each.

You can attach this rolling platform to the case with four screws from the inside, using the holes in the case from the original rubber feet.

This works perfect...rolls easily over all surfaces, and adds enough weight to the bottom of the case to improve stability.

If you have bottom air intakes in your case, you can cut holes in the wood platform to match.
Click to expand...

it
s a good idea that way my case is untouched since I am going to be using the original holes to hold the wooden piece. But where can I get stand alone swivel wheels from ?
 
I see Ebay is loaded with swivel wheels let's see... and I even got a better idea, I found some hooded swivel casters that I can bolt to my existing case holes, that will be so much easier and much cleaner. 😉
 
There's a problem doing it that way.....the wheels will be too close together, and will cause the case to tip over unless you're real careful.

Using the wood platform, you can mount wheels right at the corners....much more stable. You can buy casters of different kinds at most large hardware stores.
 
Well I have made a bid a while from now on all nickel swivel casters, in case I found my case to be unstable with them at the location my case feet are right now I will drill holes at the corners of the case that way my case will be as stable as the wood peice would have made them, right ? The reason is that I want the casters look as if they were part of the case , they should look very nice 😀
 
you mean you are doing this for practical reasons? 😉 Why not just bolt them to the bottom of your case? Preferably with 4 screws, or bolts, or whatever you are using. Actually, how heavy is your case? I wouldn't use any less than four for mine, but, well, yea...

 
Originally posted by: tasburrfoot78362
you mean you are doing this for practical reasons? 😉 Why not just bolt them to the bottom of your case? Preferably with 4 screws, or bolts, or whatever you are using. Actually, how heavy is your case? I wouldn't use any less than four for mine, but, well, yea...
Click to expand...

:laugh:
 
Offcourse the wheels are bolted I was just joking above I have fears that you might have taken that seriously TAS well I was able to fool ya there at least LOL
 
Originally posted by: The Linuxator
Offcourse the wheels are bolted I was just joking above I have fears that you might have taken that seriously TAS well I was able to fool ya there at least LOL
Click to expand...

I was just looking forward to racing... Oh well though. The search continues... 😉
 
Originally posted by: tasburrfoot78362
Originally posted by: The Linuxator
Offcourse the wheels are bolted I was just joking above I have fears that you might have taken that seriously TAS well I was able to fool ya there at least LOL
Click to expand...

I was just looking forward to racing... Oh well though. The search continues... 😉
Click to expand...


Wrong, the search ends here, let's race (at least after I get my wheels deleivered) since your case weighs a ton, I will out of kindness give you a head-start 😉
 
Originally posted by: The Linuxator
Originally posted by: tasburrfoot78362
Originally posted by: The Linuxator
Offcourse the wheels are bolted I was just joking above I have fears that you might have taken that seriously TAS well I was able to fool ya there at least LOL
Click to expand...

I was just looking forward to racing... Oh well though. The search continues... 😉
Click to expand...


Wrong, the search ends here, let's race (at least after I get my wheels deleivered) since your case weighs a ton, I will out of kindness give you a head-start 😉
Click to expand...

LOL. You are forgetting though. My 150 case just as to find a hill, and it's on. And I don't have to worry at all about mine falling over, so my weight > your lack of stability. 😉
 
Originally posted by: tasburrfoot78362
Originally posted by: The Linuxator
Originally posted by: tasburrfoot78362
Originally posted by: The Linuxator
Offcourse the wheels are bolted I was just joking above I have fears that you might have taken that seriously TAS well I was able to fool ya there at least LOL
Click to expand...

I was just looking forward to racing... Oh well though. The search continues... 😉
Click to expand...


Wrong, the search ends here, let's race (at least after I get my wheels deleivered) since your case weighs a ton, I will out of kindness give you a head-start 😉
Click to expand...

LOL. You are forgetting though. My 150 case just as to find a hill, and it's on. And I don't have to worry at all about mine falling over, so my weight > your lack of stability. 😉
Click to expand...

🙁 You just had to destroy my hopes didn't you :brokenheart:
 
hehehehe. We'll try to keep it fair... Speaking of which, I just had another idea for a my machine & a P180 pic. hehehe
 
Originally posted by: tasburrfoot78362
hehehehe. We'll try to keep it fair... Speaking of which, I just had another idea for a my machine & a P180 pic. hehehe
Click to expand...

HAHA bring it on , the one before was awesome :laugh:

Here is a nice idea for the P180 pic , why don't you just make a pic of your case with the P180 coming out of the back of it got the hint ? 😉
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top