Informal Poll: XP2100+ - highest overclock & what vcore?

[Wigwam]

trying to get a feel how hard ppl have pushed this beast using stock Vcore [and stock HSF - or least not an "O/C'ing" HSF; the speeze for example]

 

[dml54]

I had an XP2000+ at 2125Mhz with default voltage and the AMD retail cooler that came with it. Probably would have done more but my PC133 didn't like anything over 170Mhz

 

[edmundoab]

i've tried a 211 Mhz FSB X 11 on the XP2100+
and it seem to work well for like 8 months,,
then I had instability problems gaming after that..
VCore was 1.750

so now, its down to 205 X 11.
and very stable till today,
the processor is almost 1 and a half years I believe..
Now, Vcore is 1.725

 

[JustStarting]

2425mhz- 1.82v on air.

XP2100DUT3C
AIUHB 0304

it's FS in the FS/FT forum= $60 shipped.

 

[Wigwam]

so how high did you get before you had to up the vcore from stock?

 

[Wigwam]

even though it wasnt the reason when i started this question, please see my other posting "o/c woes" to see why i am now especially interested to see how far stock vcore can be pushed on this chip!😱

 

[hytek369]

Originally posted by: JustStarting
2425mhz- 1.82v on air.

XP2100DUT3C
AIUHB 0304

it's FS in the FS/FT forum= $60 shipped.

nice chip 😀

 

[maluckey]

I have an AIUHB 0302 XP-2100+ @ 2.47 Ghz, 1.825v in BIOS. Air cooled with only a 38 CFM fan. Prime95 stable.

I can hit 2158 Mhz on default voltage @ 166 Mhz FSB.

 

[chilled]

I'm running 13 x 166 FSB = 2166MHz 24/7. Set 1.65V in BIOS - actual 1.62V.
The max I've tried is 13 x 173 ~ 2250Mhz. Needed 1.67V in actuality.
My PC2100 limits me - 166MHz @ CAS2 is fine but i get little improvement maxed out as 173 @ CAS2.5 is kinda slow.

AXDA2100DUT3C
AIUHB 0301
Coolermaster CP5-6J31C with std 60mm fan
(i wanna get a silent boost now)

 

[Duvie]

I dont know the stepping but I have it at 2.0 plus with default vcore since my board does not offer vcore adjusmtents..It reports it as 1.57-1.58v at idle....24 hour prime stable...I use retail HSF and load temps of 24 hours of FH is 54c...

 

[Wigwam]

Originally posted by: Duvie
I dont know the stepping but I have it at 2.0 plus with default vcore since my board does not offer vcore adjusmtents..It reports it as 1.57-1.58v at idle....24 hour prime stable...I use retail HSF and load temps of 24 hours of FH is 54c...

what fsb/multi?

 

[hytek369]

i had a 1800XP tbred b up to 2400mhz at 1.8volts

 

[kyparrish]

i run my 2100+ at 13x170, w/ a 1.725 vcore

 

[FFactory0x]

I got my 2100+ 306 to 11.5x200 Stable. Could care less what prime says as this things has been running fine for 6 months.
Could prooly take the fsb up higher though i would need a nb cooler for my 8rda+ 1.1

 

[Duvie]

Originally posted by: Wigwam

Originally posted by: Duvie
I dont know the stepping but I have it at 2.0 plus with default vcore since my board does not offer vcore adjusmtents..It reports it as 1.57-1.58v at idle....24 hour prime stable...I use retail HSF and load temps of 24 hours of FH is 54c...

what fsb/multi?

stock multiplier 13 x 154fsb for 2ghz.....I can go higher but my ram starts to hold me back. See this is my wifes PC and she doesn;t want me tinkering with it so I didn't spend the money on the right Ram....The fact is this shuttle board undervolts and so I am running considerably under the 1.65v default so I think I could get higher...This is primestable for 24 hours....

 

[discostusback]

yeah man c'mon some people i know have their 1700's running at 2.38 with air cooling so you should easily be able to get that or higher

 

[TerryMathews]

I had a pair of 2100+s runnin on a MPX board at 2266MHz a piece at 1.85V

 

[peonyu]

2100+ @ 2240mhz with 1.8 voltage.

 

[Wigwam]

Originally posted by: FFactory0x
I got my 2100+ 306 to 11.5x200 Stable. Could care less what prime says as this things has been running fine for 6 months.
Could prooly take the fsb up higher though i would need a nb cooler for my 8rda+ 1.1

nice. wot hsf and wot temps you getting?
what vcore did you need to do that?