im having trouble flasing

[thanasi]

this is my first time flashing cause I have the 3700 san diego and, I downloaded the lastest bios ,made bootable dos disk but there is a command promt wtf?need help on this issue

 

[thanasi]

please help me im so strested out im on the virg of killing my self

 

[thanasi]

figured it out thanks for the help guys

 

[Demo24]

maybe you dont realize noone sits here all day to help you

not to mention you dont need to flash for a revision E core anyway

 

[thanasi]

yeah i did it was very unstable

 

[rise]

Originally posted by: thanasi
figured it out thanks for the help azzhOles

reverting back to your old ways again. so soon, too.

for a few days i thought you were older than 14.

 

[thanasi]

nah man i aint but i thought someone would post in at least 2 days I was fustrated forget it anyways

 

[WildHorse]

Hope this helps you:

1) Make a bootable floppy ( in DOS, format A: /s)

2) Look at this page. (below is © Copyright 2004 Lejabeach Dot Com, Inc)

Especially note this:
A method of flashing an Award BIOS is to automate it. By creating a prepared bootdisk with the flashing utility and the BIOS .bin file on it, you can create a bootable disk that will flash the BIOS and perform other functions for you without having you type anything. After you have created a bootable floppy, using you favorite text editor, open the autoexec.bat file located on the floppy disk. If one is not present then just save the file once you have created it to the floppy as autoexec.bat. The following code will completely automate the flashing procedure for you:

@echo off
if exist oldbios.bin goto old
awdflash.exe newbios.bin oldbios.bin /py /sy /cc /cp /cd /sb /r
goto end
😱ld
awdflash.exe oldbios.bin /py /sn /cc /cp /cd /sb /r
:end

So you just copy the above code, paste it into a text file, save to floppy with the name Autoexec.bat (I don't know how to suppress the smiley in the above code, but it should read colon zero, not smiley)

3) Then you also save your unzipped BIOS file on your floppy.

4) Also save awdflash.exe file on your floppy.


5) Power off, shove floppy in, power up. It runs the flashing all by itself, you don't type any commands. At least, that's how it works for me.

 

[Zap]

You need an old trench coat. Make sure to not wear anything under it. Find a suitable location and wait for a victim to walk by.

Oh wait, wrong forum...

 

[theMan]

Originally posted by: rise4310

Originally posted by: thanasi
figured it out thanks for the help azzhOles

reverting back to your old ways again. so soon, too.

for a few days i thought you were older than 14.

hey, don't flame on people under 14, its not very nice, but oh well, im turning 15 in a week anyway, so i guess i can do it too. 🙂