If you run a CUSL2-C w/ a PIII 700 @ 933, what's yer voltage?

[StrangeRanger]

If you are running a pIII 700 @ 933 or more on a cusl2-c, what is your voltage set at? thnx,
j

 

[Wingznut]

I had it running at 1.75v, but it might differ for you.

 

[Radboy]

1.80 cB0 retail, cusl2 (not c)

1.75v gives me stability 99% of the time. 1.80 100% of the time.

sometimes on especially hot days 1.75v wouldn't do the trick.

 

[Peridium]

I also have a PIII 700E along with an Asus CUSL2. I usually run it at 966MHz at 1.85V. When at 933MHz, it would require 1.75V for complete stability. It?s quite a nice setup, plus it overclocked quite well.

Too bad the CUSL2 won't be able to use the new Tualatin processors...

 

[AndyHui]

I need 1.85 volts to be 100% stable, 700@933 or 945.

 

[rushr]

System 1 700@933 1.65v

System 2 700@980 1.65v

Both are cbo stepping,haven't gotten around to seeing how high they will go.The CUSL2-C is the best mobo I have ever used,talk about stability!

 

[rickn]

My 650e runs 961mhz 1.75v 100% stable..oh for about 10 months I guess. CUSL2 (not a C)

 

[jzodda]

1.85 @ 933 or 945

 

[damocles]

1.65V seems stable, but i run it at 1.75 anyway

 

[Syborg1211]

got my cBo 700 at 933, I think it runs stable at 1.7 but I run it at 1.75 for fun. I can run my cpu at 700 at 1.45 volts though 😀

 

[Tominator]

I keep mine at 1.75 although it might run lower....on a CUSL2.

 

[abaez]

1.65 cbo stepping at 933