i7 P6T Water Setup in Lian Li PC-7F

[Tweakin]

To start off, I'm looking at the following items to cool the CPU, NB/SB and Mosfets:

Thermochill 160 Rad
Swiftech MCP655
Bitspower MOS Block #1
Bitspower MOS Block #2
Bitspower NB/SB Block
Swiftech Apogee GTZ
Swiftech Apogee 1366 Kit

These are the main pieces...question is if the 160 Rad will handle this? I would like to go with a TFC 120.1, but I really don't think that will handle the thermals.

 

[aigomorla]

Originally posted by: Tweakin
To start off, I'm looking at the following items to cool the CPU, NB/SB and Mosfets:

Thermochill 160 Rad
Swiftech MCP655
Bitspower MOS Block #1
Bitspower MOS Block #2
Bitspower NB/SB Block
Swiftech Apogee GTZ
Swiftech Apogee 1366 Kit

These are the main pieces...question is if the 160 Rad will handle this? I would like to go with a TFC 120.1, but I really don't think that will handle the thermals.

Bitspower makes a block for the P6T???

You sure your not confusing it with an R2E? And becareful there not cross compatable.

Only NB/SB block i thought was made for the P6T was CnC and Mips.

Good luck finding a CnC block tho, only 22 was made, and all are sold.

 

[LOUISSSSS]

is that rad for 1 x 160mm fan??

u sure that'll be enough for all your cooling?

maybe a 360 radiator would be better..

 

[Tweakin]

aigomorla: I pulled that information from their site...but they don't look right, hence why I was asking for conformation.

Louisss: I don't know that a 160 rad will be enough, again that's why I was looking for help. I can't fit a 120.2 let alone a 120.3 in the case. The 160 has almost as much surface area as a 120.2.

I believe the 160 will cool the chip fine, it's the additional thermals from the mosfets and NB that I'm really worried about.

I was also considering that if I only cool the chip, I may want to go with a high pressure head like a koolance unit and maybe a swiftech 355 with a EK top to keep the pressure up.