I5 2400 overclock

[jons1976gp]

Just built a new system to replace my aging core2duo e6600 system. Regret not spending the 30 for the k model, but as I mainly just use my sytem for Iracing/Rfactor, I think its sufficient. I'm using a biostar tz68+ board. my current overclock is 104mhz*36= 3744 I'm using a XGIMA GAIA cooler. Do these temps look good and safe? as im typing they are at 52 58 57 53 C in realtemp running prime95 for 20 min.

Thanks,

Jonathan

 

[Crap Daddy]

the temps are very good, if everything's stable you're set.

 

[sangyup81]

turbo overclocking for the win!

 

[jons1976gp]

Thanks guys, in the trbo section of the bios, the highest i can set the multiplier core 1 is 36. the other 2 cores i believe is 35, then 34 for the 4th core. Ive seen others use 38, is this because I bought a heaper board? Well anyways, the performance is still magnitudes better than myprevious system, so no complaints! 🙂 I ran a full 100 lap truck race last night and all was stable, so should be set.

Thanks again

 

[vargaso876]

turbo overclocking for the win!

 

[dbcooper1]

I'd move the 104 back to default and play with the turbo some more. I had the same problem but finally got mine to do 36 with 2-3 cores loaded and 38 with one. Best of both worlds for the price- 3.8GHz single threaded and 3.2-3.6 multi and at stock voltages and overclocking only the CPU. Might be able to get 4.5-5.x with a 'k' and a better board but at what price compared to this?