I KID YOU NOT! One of my computers just BLEW UP!

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

dpopiz

Diamond Member
Jan 28, 2001
4,454
0
0
lots of you are talking about purposely blowing capacitors....hmmm isn't the stuff inside toxic and environment-polluting and earth-destroying and universe-discombobulating
 

dpopiz

Diamond Member
Jan 28, 2001
4,454
0
0
ooo yeah while we're on the topic of blowing up electronics for amusement purposes, I should mention that a great fireworks show can be seen by hooking up lots of those "jumbo" 5v leds in parallel and wiring them to an outlet (CAUTION ADVISED DON'T TRY THIS AT HOME KIDS)
 

dszd0g

Golden Member
Jun 14, 2000
1,226
0
0
Originally posted by: dpopiz
lots of you are talking about purposely blowing capacitors....hmmm isn't the stuff inside toxic and environment-polluting and earth-destroying and universe-discombobulating

The container is made mostly of aluminum (or tantalum in tantalum electrolytic). Several different electrolytes inside are used: boric acid and ammonium; sodium borate; or if better temperature range is needed combinations of distilled water, boric acid, ammonium borate, glycerol, and or glycol. These probably are toxic and not very environmentally friendly.
 

sharkeeper

Lifer
Jan 13, 2001
10,886
2
0
If the capacitor is very old and filled with PCB's then yes. Detonating one of these would be extremely dangerous and foolish! :Q

Typical electronic electrolytic capacitor, no. Aside from physical injury due the explosion, there is little environmental hazard. As a matter of fact, we have done this in an indoor lab. (hence the reference to deepfried cheerios!)

Cheers!
 

Crusty

Lifer
Sep 30, 2001
12,684
2
81
Originally posted by: anthrax
I would say the fuse blown...if glass fall out...then its the fuse for sure..


umm......
So, I take a look and everthing looks fine, and I turn it on again. It posts fine and goes into Windows no problem.

If you knew anything about fuses you would know that NOTHING would work if the fuse blew.