ello! Help me Please!
I've got two WRT54G ap-router. I want to use Client mode, but it doesn't work.
Main router (Linksys 3.03.9 firmware)
******************************
Local IP = 192.168.1.1
Subnet Mask = 255.255.255.0
DHCP server: Disable
Advenced routing:
Operated mode = Geteway
Destination LAN IP = 0.0.0.0, Subnet mask = 0.0.0.0, Default gw: 0.0.0.0, Interface = Lan & Wireless
Wireless security: Disable
Client router (Sveasoft Alchemy 1.0)
******************************
Internet Connection Type = Static IP
Internet IP Address = 192.168.1.2
Geteway = 192.168.1.1
Static DNS1 = 192.168.1.1
Local IP = 192.168.2.2
Subnet mask = 255.255.255.0
Geteway = 192.168.2.2
Local DNS = 192.168.1.1
DHCP Server = Enable
Wireless mode = Client.
SSID, Channel = (same as the main router)
Firewall: Disable
Wireless security: Disable
In administration: All settings are default. (I don't know what have to set).
I tired these settings, but I couldn't ping the main router from the client router. (My client router's WAN port isn't good: it was killed by the lightning). BUT if I use a Freeman-talisman 1.0.2 fw on it, and it's in Client-Bridged mode, I can ping the main router. But with this freeman-talisman I can connect only one PC to the client router (If I connect 2 PC the Internet stop.)
So, What I set in alchemy, it doesn't work, and the freeman is only works with one PC.
Please help me! (I try to client mode since 2 weeks)
I've got two WRT54G ap-router. I want to use Client mode, but it doesn't work.
Main router (Linksys 3.03.9 firmware)
******************************
Local IP = 192.168.1.1
Subnet Mask = 255.255.255.0
DHCP server: Disable
Advenced routing:
Operated mode = Geteway
Destination LAN IP = 0.0.0.0, Subnet mask = 0.0.0.0, Default gw: 0.0.0.0, Interface = Lan & Wireless
Wireless security: Disable
Client router (Sveasoft Alchemy 1.0)
******************************
Internet Connection Type = Static IP
Internet IP Address = 192.168.1.2
Geteway = 192.168.1.1
Static DNS1 = 192.168.1.1
Local IP = 192.168.2.2
Subnet mask = 255.255.255.0
Geteway = 192.168.2.2
Local DNS = 192.168.1.1
DHCP Server = Enable
Wireless mode = Client.
SSID, Channel = (same as the main router)
Firewall: Disable
Wireless security: Disable
In administration: All settings are default. (I don't know what have to set).
I tired these settings, but I couldn't ping the main router from the client router. (My client router's WAN port isn't good: it was killed by the lightning). BUT if I use a Freeman-talisman 1.0.2 fw on it, and it's in Client-Bridged mode, I can ping the main router. But with this freeman-talisman I can connect only one PC to the client router (If I connect 2 PC the Internet stop.)
So, What I set in alchemy, it doesn't work, and the freeman is only works with one PC.
Please help me! (I try to client mode since 2 weeks)
Facebook
Twitter