How to quiet down a 10k RPM SCSI hard drive?

jsbush

Diamond Member
Nov 13, 2000
3,871
0
76
The whine from my SCSI hard drive is really driving me nuts.

Anyone have any cheap ways to make it quiet? Those silent drive enclosers arn't recommended for 10k rpm hard drives, and this drive gets hot.

The hard drive is thicker then a normal drive to.

Thanks
 

mechBgon

Super Moderator<br>Elite Member
Oct 31, 1999
30,699
1
0
Undervolt it, maybe? JUST KIDDING! :D

I have a really loud one too, and I just don't use it except for backup purposes. Realistically, the only highly-effective method I can think of is to put it in a SCSI enclosure on the other end of a 10-meter LVD external SCSI cable :p That would probably cost enough to move you up to a 36GB Cheetah 15k.3 instead, which has those quiet fluid-dynamic bearings.
 

jsbush

Diamond Member
Nov 13, 2000
3,871
0
76
Where can I find that hard drive cooler? I did a search and can't seem to find a reseller.


Thanks
 

mechBgon

Super Moderator<br>Elite Member
Oct 31, 1999
30,699
1
0
I think this is the one in question: link Not sure what it would do for the noise production, however :confused: My advice is to get a quieter drive, period, maybe a used Cheetah X15-36LP, which has fluid bearings and a very pleasant idle noise (I have one at work).
 

jsbush

Diamond Member
Nov 13, 2000
3,871
0
76
Ok, thanks.

Yeah a quieter drive would be nice. But I'm on a really tight budget. I think i'll just tolerate the noise for now and throw the thing out the window when I can't take it anymore.



Thanks
 

socalvvguy

Member
Oct 21, 2001
59
0
0
How about using some sound dampening material on the case? I haven't done this myself yet but I have read several posts recommending sound dampening material.
 

User1001

Golden Member
May 24, 2003
1,017
0
0
Originally posted by: mechBgon
I think this is the one in question: link Not sure what it would do for the noise production, however :confused: My advice is to get a quieter drive, period, maybe a used Cheetah X15-36LP, which has fluid bearings and a very pleasant idle noise (I have one at work).

it does reduce noise pretty well. You could also just install some rubber gromets (there cheap about 5 dollars) under the screws.