How to O/C a Abit KT7-RAID

[BScott881]

I have an ABIT KT7-RAID motherboard which I originally bought for the sole purpose of overclocking. It seems it senses what processor I use and keeeps resetting the BIOS to meet the rated speed. Is this normal or what?

 

[billyjak]

You have to Pencil or ulock the L1 Bridges on the processor first , this will allow you to choose a lower or higher multiplyer, than you can also increase the FSB to the appropriate desired bus speed.
Defogger kit works for unlocking the bridges, you can also use a pencil though not as good.
Is your processor a 200mz or 266mz core.
I have the 200mz core, a 1 gig oc/ 1.430, I used the defogger kit to unluck it.
Just put a trace straight across the L1 bridges linking them together so they form a straight line, being carefull not to overlap the bridges .

 

[BScott881]

Thanks.... I had a picture showing how to connect these bridges but my CPU didn't look like that.

 

[Wind]

Wht CPU u have ? Chances are it is already factory unlocked. Look at those L1 bridges. If it look like :::: (locked) or llll (unlocked). If it is unlocked, try up the vcore to 1.8v in the bios.