• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

How to make SSD the boot drive

S

stockjock

Diamond Member
I've finally stepped into the current realm of computing and have bought my first SSD drive, Samsung 850 EVO 500gb drive. All my motherboard SATA slots were filled with HDDs and DVD so I purchased a PCIe SATA III card that allowed me to attach the SSD right to the card. Got everything installed and the SSD was found by windows and I used the data migration software that came with the SSD to make a clone of my "C" drive. The SSD drive was assigned drive letter "G". So my question is how do I make the SSD the boot drive now? I've tried going into my bios to make it the first boot device but its not showing up...my options are hard disk, CD, removable bootable device..etc. What am I doing wrong?

Here are my system specs (bit of an older system but it still kicks butt)
Foxconn Destroyer motherboard
AMD Phenom II X4 940 Processor
8gb Ram
3 Sata HDDs
Sata DVD
SSD on PCIe SATA III card
2 X EVGa Geforce GTX 960 in SLI
Win 7 64

I'm sure I'm forgetting some things so ask if you need more info.

Thanks for any help!
 
Last edited:
This is a good question. I specifically avoided Samsung's software in favor of Macrum Reflect because Samsung's software did not list any options, especially regarding the smaller partitions. Sorry I don't know the answer but I suspect it involves something to do with marking partitions as boot-able with a program like Partition Magic or equivalent (Parted Magic).

Perhaps not all MB support booting from such a device?

Best of luck!
 
Last edited:
Have you tried swapping your current bootdrive with the SSD , hooking it directly to the motherboard? Don't remember if I had to unhook everything but the SSD first time I booted.
 
I copied to my SSD just like you did, but once I was done I removed the old drive and placed the SSD in it's place (cables and everything). Restart PC and bingo, you should be booting with SSD.
 
As mentioned, if you are keeping the other hard drive on the board, swap the connections, and make sure the bios is set to boot off your SSD.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top