• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

How to get HDD off PIO and into DMA mode

S

srs

Member
i have 2 hdd on my asus a7m266 mb. the primary master is on ultra dma (ibm 75gxp) but the second is on pio mode (its a maxtor capable of ATA 66) how do i change both to ultra dma ?
 
Go to device manager and click on the IDE ATA/ATAPI Controller. Then select properties for the primary IDE Channel and under the "Advanced Settings" tab, select "DMA if available". Do this for both channels. Reboot and check in the same "Advanced Settings" field for the "Current Transfer Mode". Should be changed to DMA or ultra DMA.

Also make sure, that you're using the right ATA 66/ATA 100 cables.

 
thats what i tried but it doesn't work. i even tried changing it to pio mode then to dma but it doesn't work.
 
I used this utility from the IWill website to change the transfer mode (it will also tell you your current mode - DMA, UDMA66, UDMA100, PIO)

Ami 100
 
thanks for the help but those files are for win 9x and i'm running 2000. are there any files for 2000 ?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top