Originally posted by: Cstefan
Originally posted by: Zenmervolt
That said, images from a DSLR are often less sharp and less saturated (straight from the camera) than images from point-and-shoots and a DSLR used only in "Auto" mode will generally give results that most people consider to be "worse" than images from a good point-and-shoot.
I have absolutely NEVER found this to be the case. Well, except a Lecia. But that is a point and shoot unto it's own class.
I'm not talking about detail rendering. I'm talking about sharpening that is applied as part of the JPG conversion process in camera.
With the settings zeroed, DSLRs apply far less sharpening than almost all P&S cameras and P&S cameras also increase saturation above the default levels of DSLR cameras. These are really not disputable. DSLRs are set up this way because once sharpening has been applied, it can never be un-done. It is better to apply less sharpening by default and allow the photographer to choose in post-processing or through adjusting the camera's settings, and this is what DSLRs offer.
Now, when the settings are adjusted, or when RAW is used and images are adjusted through post-processing, the results of DSLRs can be vastly superior to results from P&S cameras. But that assumes user adjustment. A DSLR is not something that someone can just take out of the box, switch on "Auto" mode, and use. It requires some adjustment of the default settings for the best possible results.
In my experience, people who are accustomed to the over-saturated and over-sharpened images that are produced by P&S cameras are initially disappointed by default DSLR output because they want the bright colors and high sharpening and contrast that P&S cameras default to. I certainly didn't mean to imply that P&S cameras make better photos, only that for most "family snapshot" photographers, the over-saturated and over-sharpened images from P&S cameras are initially more attractive than the more conservative default outputs of a DSLR even though the latter offers higher quality.
ZV
EDIT:
Excellent example posted by Corpsy in this thread. The image without sharpening is what will typically come out of a DSLR on default settings, while the image with very high sharpening is what will typically come out of a P&S camera on default settings. Many people will initially prefer the highly-sharpened version even though it has had more manipulation done to it.