How much is your cpu overclocked?

[gururu]

[(your current MHz) - (stock MHz)]/(stock MHz)

mine:

(2.34-1.6)*100/1.6= 46%

please round up to nearest 10

 

[Mloot]

10% - 3.0C@3.3

 

[imported_Computer MAn]

Have my A64 3000+ 2.0 ghz@2299. A 14% overclock. With a DFI Lanparty still getting the hang of the bios. (260x9)

 

[PlatinumGold]

i got my a64 3200+ 2.2@2.31, but i backed it off, until i get a better power supply and a better hs.

 

[toastynoodles]

Got my moblie xp 2500+ 1.83 up to 2.4mhz !!!!!!!!!!!!!

 

[boyRacer]

2100+ 1.73 ghz @ 2.2ghz 28%

2500+ 1.82 ghz @ 2.2ghz 17%

 

[goshdarnindie]

Did it today. 2400+ to act like a 2800+ or 1.67GHz to just under 2.0GHz

 

[bobsmith1492]

Yippers... 1.8GHz mobiley up to 2.5 - near 80%... well, ok it was closer to 70 i guess, but i got excited... so that's my 80% there

 

[gururu]

Originally posted by: bobsmith1492
Yippers... 1.8GHz mobiley up to 2.5 - near 80%... well, ok it was closer to 70 i guess, but i got excited... so that's my 80% there

that's 'only' a 40% overclock!!!

 

[bobsmith1492]

hm... sorry; i was doing 1.8/2.5.......

 

[bobsmith1492]

and I'm studying engineering.....



seriously

just be glad it's not math

 

[Travis6586]

Who's got a 100% overclock? By all means, share with us your setup!

 

[imported_goku]

Tavis I think you should get some PC4000 Memory to get a better overclock because 3.3 out of 3GHz isn't too good of a overclock.

 

[Mloot]

Originally posted by: goku2100
Tavis I think you should get some PC4000 Memory to get a better overclock because 3.3 out of 3GHz isn't too good of a overclock.

 

[Mloot]

Originally posted by: goku2100
Tavis I think you should get some PC4000 Memory to get a better overclock because 3.3 out of 3GHz isn't too good of a overclock.

Meh, 3.3 isn't so bad. He's running the same overclock as I on the same CPU. We also have similar mobo's, but I'm running mine on a P4C800-E Deluxe. I have pc4000 memory in mine, but what is limiting my overclock is a wildly variable Vcore coming from the mobo. It's a problem inherent in some P4c800-E Deluxes (perhaps in Travis' board, too) that can be remedied by doing one or two volt mods to the mobo, but darn it if I'm going to do some soldering (which I've never done before, and would probably screw up anyway) on a board that shouldn't have this problem in the first place.

 

[thermalpaste]

Originally posted by: Travis6586
Who's got a 100% overclock? By all means, share with us your setup!

HERE'S MY OVERCLOCK ON A STOCK HEATSINK+FAN:
Asus CUBX-E
256MB hynix PC-133
Intel Celeron 300A Mhz (66*4.5) overclocked to 675 Mhz.(150*4.5)

-------------------------------------------------------------------

Asus CUBX-E
768MB corsair PC-133
Intel Pentium-III 700E (100*7) overclocked to 1050 Mhz.(150*7) on stock HSF.

----------------------------------------------------------------------


My 2 bests overclocks % wise

 

[Zugzwang152]

0% (i know, i know, wtf am i doing in the cpu overclocking forum then )

athlon xp 3200+ @2200mhz. i don't think these things go very much higher anyway.

 

[RalfHutter]

(2994 - 3000)/3000 = 0%

 

[coinz]

hmm my overclock is at 25%, athlon 64 3000+ stock- 2 Ghz got it running at 2.5

 

[osage]

20% on my A64s

40% on a couple Mobile Bartons

 

[tfinch2]

20%

1.667 to 2.0 ghz

 

[TheStu]

A 36% increase on my Mobile Barton 2500. From 1.83 to 2.5....w00t... but I want more!!!!

 

[saechaka]

2.4 to 3.2

 

[Hikari]

My Athlon XP 1700+ (1.47ghz) is at 2.0ghz.

 

[Travis6586]

Originally posted by: goku2100
Tavis I think you should get some PC4000 Memory to get a better overclock because 3.3 out of 3GHz isn't too good of a overclock.

I've been trying to decide whether I should do that very thing or not. I'm not sure how much $ I could get for this Mushkin DDR400 RAM I've already got. Whatever I get from that, I could put towards the DDR500 RAM, and then have a better overclock. The only thing is, even when I underclock my RAM so that its not the bottleneck anymore, my CPU gives me the "blue screen of death" at 3.5 GHz when running Prime95. I'm not sure if its because I don't have enough wattage flowing to it (400-watt Antec), if the V-Core just needs to be increased some, or if I just have a not so good overclocking CPU.