How Far Should I Go Athlon 650@900 1.95V

[OOSH]

I have a MC2001 dual 78 Watt peltier from Swiftech. Currently I?m running a Athlon 650@900 at 1.95V running stable. Has anyone tried to push their Athlon even further?

 

[veryape]

Actually thatv is quite a high voltage and higher than most people including myself would go. Thats a good way to ry your processor. I wouldn't go over 1.90 but do as you wish,just some friendly advice.

 

[frank828]

uh...he has a dual 78watt peltier...i think he's fine, i burned mine in for a day at 2.05 without getting above 98 degrees with just my alpha, so im thinking its fine.

Dang nabbit, i only got my athlon 650 up to 800 tho using 1.8v, if i could, i'd go higher.

frank

 

[MagnusPAH]

Just monitor your CPU temp and crank the voltage up to 2.05V and increase the FSB. You probably can go a little higher going to 2.05V.
I have a MW2000 from swiftnets (dual peltier cooled by waterjacket) and I managed to overclock my 750 to 1018Mhz at 2.05V. However, I know I can go further if I chill down the water (running at 100-105F water temp). I am waiting for 2 waterjackets to help me cool the water temp to 50-60F which should make the cpu core around 30-40F and then I will try for 1100Mhz (hit 1050Mhz once when the room was cool and the water temp was around 80F).
So, with your dual peltier, crank up the FSB and monitor the cpu temp. You might get near or actually hit a gig.
PS. What is your core by the way? 650 at 650 core?

 

[OOSH]

At 650 my Core is 1.6V. By the way thanks for the feed back. I hit 958 at 2.05 stabel this morning.