- Nov 12, 2013
- 19
- 0
- 66
The only way to determine for me on my laptop motherboard is through physical observation. Can somebody tell me where to look? Thanks.
you would have to physically disassemble the laptop to a point where you can remove the heatsink and in most(maybe not all) it will list the socket type on physical socket or around it.
IF the laptop still can boot off a windows 7/8 install media (dvd or usb) you can put cpu-z on a flash drive and when you see the install screen hit Shift+F10 and it will bring up a command window, change the the usb drive letter (may need to try d: e: f: ) and run cpu-z from there and it should tell you
do you know what cpu is in the laptop? or what model the laptop is? if you know the model it should be somewhat easy to look up the model number.
Just Google the specific processor model. ARK Intel will usually have the exact information that you need.
In this case it is either PGA988B or PGA989. Can you tell me the difference between those 2 sockets?
It should be labelled on the socket.
Socket G2 is for Sandy Bridge CPUs. Socket G1 is for older ones. They are physically identical, but the CPUs/chipsets will be different and incompatible.
What kind of CPU did the laptop have originally?
Its been a very long time since I've tore apart laptops to see whether there's an indicator of its PGA socket type. There's a good chance that what dave_the_nerd said is correct.In this case it is either PGA988B or PGA989. Can you tell me the difference between those 2 sockets?
Can't do that. It's why I mentioned that I can only do physical observation.
No. BGA and PGA are two different ways of CPU mounting. BGA is permanently soldered to the motherboard and non removable without the factory equipment.Can socket be BGA and PGA at the same time?![]()
Go to Dell support, type in your Service Tag, and check the System Configuration/Original Configuration/Components. It'll tell you exactly what CPU the system shipped with. Then look up the CPU to find the socket type.
In this case it is either PGA988B or PGA989. Can you tell me the difference between those 2 sockets?
No. BGA and PGA are two different ways of CPU mounting. BGA is permanently soldered to the motherboard and non removable without the factory equipment.
Go to Dell support, type in your Service Tag, and check the System Configuration/Original Configuration/Components. It'll tell you exactly what CPU the system shipped with. Then look up the CPU to find the socket type.