How do i overclock a 6600 non GT?

[videoclone]

Now i read somewhere that i am sposed to disable the CPU clock check with Rivatuna so it doesnt limite the overclock.

I think i found it in rivatuna and it was ticked so i unticked it and then when i go back into the section to check on it ...its ticked again ... how do i save the setting ... it seams to want to save onto a file .. does this mean onto a forcware driver file then i install the card again from that driver?

Anyways anyone got any idea's how to overclock this thing? I know 6600 cards can get to speeds of 550Mhz .... so this thing should at least get more then 345Mhz

Expertvision 6600 non GT AGP 8 pipelines 3 vertex 300Mhz core 400Mhz ram <-- memory is below the standard 500Mhz ... What a rip off. anyways at least the heatsink and fan on it look pretty chunky.

Here's larg picks and a review for the card.

 

[kurt454]

I have a 6600 in my backup rig. I used Nibitor to adjust my clocks to 400/650 and reflashed the card. Could probably go higher on core, but my Leadtek has a puny fan, and it is running a little warm at 400. If you don't want to flash, you might can try coolbits to o/c the card.

 

[videoclone]

theres gotta be a better way though .. coolbits only lets me get ot 345Mhz

 

[Crescent13]

what are your temps?

everything makes you test.

 

[videoclone]

39-49

 

[RelaxTheMind]

Originally posted by: kurt454
I have a 6600 in my backup rig. I used Nibitor to adjust my clocks to 400/650 and reflashed the card. Could probably go higher on core, but my Leadtek has a puny fan, and it is running a little warm at 400. If you don't want to flash, you might can try coolbits to o/c the card.

sorry for reviving an older post but what exactly did you flash your 6600 (non gt) with?

im asking because i just ordered a 6600 256mb agp and its stock clocks are 300/500