Originally posted by: Eli
AFAIK, it's normal.
It does seem strange that it would appear, though. Are you sure you just never noticed it before?
Originally posted by: spidey07
isn't this a sign of an unstable power supply?
yeah - a few good whacks should help. I'm not kidding.
Check the fuse or power supply resistor.Originally posted by: Amused
Originally posted by: spidey07
isn't this a sign of an unstable power supply?
yeah - a few good whacks should help. I'm not kidding.
What he said.
OMG.. BAHAHAHAOriginally posted by: jst0ney
Its the flywheel converter. Very hard and expensive to fix. If you open your tv you will prpbably die even if you have the power unpluged. Capacitors in there will hold a lethal charge for a very long time. You are better off getting a new tv. I speak form experience, my tv did the same thing.
Originally posted by: morkinva
Warning, if you touch one of those capacitors which are right next to the transformer, then your toast, unless you properly discharge them.
Originally posted by: jagec
Originally posted by: morkinva
Warning, if you touch one of those capacitors which are right next to the transformer, then your toast, unless you properly discharge them.
"Properly discharge" = go up to your friends and say "Hey, want to feel something cool? Touch that!"![]()
Originally posted by: DrumminBoy
my tv does it too...a few brisk hits to the back usually quiets her down for awhile
Originally posted by: morkinva
If it is the flyback transformer, it will eventually get louder, start crackling and fail. I fixed mine by using some of that gasket maker stuff for cars. You have to put it on where you see it arcing with a thick layer of gasket maker. Then let it dry completely for 24 hrs before using it.
Warning, if you touch one of those capacitors which are right next to the transformer, then your toast, unless you properly discharge them.
NO.Originally posted by: Skiguy411
Originally posted by: morkinva
If it is the flyback transformer, it will eventually get louder, start crackling and fail. I fixed mine by using some of that gasket maker stuff for cars. You have to put it on where you see it arcing with a thick layer of gasket maker. Then let it dry completely for 24 hrs before using it.
Warning, if you touch one of those capacitors which are right next to the transformer, then your toast, unless you properly discharge them.
Hm....this sounds like something I could do. To properly discharge the capacitors, couldnt you just unplug the tv while it is on?
The capacitor might hold the 40000-50000v charge more than a couple of weeks.Originally posted by: Skiguy411
Then how would you recommend discharging them other than just letting the tv sit there without it plugged in for weeks?
Originally posted by: OffTopic
The capacitor might hold the 40000-50000v charge more than a couple of weeks.Originally posted by: Skiguy411
Then how would you recommend discharging them other than just letting the tv sit there without it plugged in for weeks?
Connect a wire to ground and the other to a metal screw driver with wood/plastic handle. Wear rubber gloves & wrap a dry rag around the flyback cable. Then lift the cup on top of the monitor that the cable attaches to and jam the grounded screw driver underneath the cup to discharge.
Originally posted by: dmurray14
Originally posted by: OffTopic
The capacitor might hold the 40000-50000v charge more than a couple of weeks.Originally posted by: Skiguy411
Then how would you recommend discharging them other than just letting the tv sit there without it plugged in for weeks?
Connect a wire to ground and the other to a metal screw driver with wood/plastic handle. Wear rubber gloves & wrap a dry rag around the flyback cable. Then lift the cup on top of the monitor that the cable attaches to and jam the grounded screw driver underneath the cup to discharge.
:Q
Skiguy, just go buy a new tv. It's not really worth getting fvcked up to save a few bucks!