How can I run CAT5 cable against a wall

[AShadeOfClear]

I am running a 50 foot CAT5 cable from a computer to a hub. It travels through my hallway and not only is this very ugly but the cable is prone to getting stepped on which, of course, is not good. I need some information on what I can use to keep the cable against the wall, near the floor (without using tape, of course).

I think some kinds of staples can be used, but what tools would I need for that? Also, as an alternative, could you suggest something less damaging to the wall? I'm thinking of some kind of adhesive hooks that will stick to the wall and hold the cable.

Also, information on where to purchase would be great. Thanks in advance for the help.

 

[blstriker]

I use white cat 5 cable held against the wall using coax retainer clips. This basically looks like a 1 inch nail with a plastic clip that is shaped like a halfpipe to press the cable against the wall when the nail is nailed in. I'm too tired to describe it better. You can get these things at home depot or any other hardware store. Just ask for the retainer clips/fasteners for mounting coax cable. Maybe somebody else knows the name of that dang clip. sheesh.

 

[ScottMac]

You could probably use something like wall-mount channel. Panduit is a common manufacturer, and it's available in most electrical/electronics suppliers (not Radio Shack). I believe that Home Depot, Menards, and places like that also have it.

Staples and cable tacks are not recommended because you can compress the jacketing, or miss with the hammer while driving them in and smash the cable.

Good Luck

Scott

 

[Goosemaster]

Staple gun?



Actually, the retainer clips are a godsend......you may be able to even find them at the dollar store.... good luck

 

[Dan]

AShadeOfClear: RadioShack carries some adhesive backed clips that will do the job for you. However, I think what you use depends on whether you rent or own. If you own the place, I'm with ScottMac. Wall-mounted channels will give you the most finished, "professional" look.

Of course, if you own you could also run the cable through the basement or attic. (I see you're in CT, where they have such things.)

On the other hand, if you rent, I'd just go "down and dirty." I realize Goosemaster said it in jest but I'd grab a staple gun and be done with it.

 

[Slaughter]

If its carpeted, I would stuff it down between the tack strip and the baseboard. A flathead screwdriver works good, but be careful not to puncture the casing of the cable or crimp it in any way.

 

[tboneuls]

 

[usmc666]

Originally posted by: Slaughter
If its carpeted, I would stuff it down between the tack strip and the baseboard. A flathead screwdriver works good, but be careful not to puncture the casing of the cable or crimp it in any way.

Thats a great way to ruin a good cable

 

[Wirehead]

Actually going under the baseboard is the best if he has carpet. This way it totally disappears. I use a very small socket on a socket wrench extension. That never punctures the cable.