How are the week 24 Barton 2500+'s doing?

[Peter D]

Hi all!

Well,my bro is gunna get me a Barton 2500+ cpu in exchange for my 8RDA+, 1700+, and some RAM, but anyways..

The seller told him the stepping was 0324 AQXEA, and im just wondering how these chips are doing for overclocking? Yes I've checked out a couple of CPU databases but most of the entries aren't specific of the week..

My system specs are:

• NF7-S V2.0
• 2x256Mb OCZ 'EL' PC3500
• SLK-800A w/ 92mm Panaflo M1A
• GF4 Ti 4400
• Seagate Barracuda IV 60Gb
• 300W PSU (<-- Gotta upgrade)

BTW: Going to be getting some new cooling equipment soon. SLK-900U and Vantec Tornado 92mm so cooling shouldnt be too much of a problem then..

Thanks!

-Peter

 

[Jeff7181]

Mine is running at 2.2 Ghz on default voltage. Temp rarely gets above 50 C. Temp in the room has to be above 28 C for the CPU temp to get above 50 C. And as you can see in my profile, on 1.750 volts I can get 2.3 Ghz out of it... but it's not worth the increase in heat... goes up to 66 C under load at that speed and voltage.

 

[Peter D]

bump

anyone else?

 

[MatthewF01]

mine is struggling to exceed a 185mhz FSB, whereas my 1800+ TbredA was running 217 on a Chaintech 7NJS...


im REALLY bummed out, my last hope is to blow the L12 bridge with a 9v battery and switch it to a 133fsb....