Higher than 12.5 multiplier. How to PLEEEEEEEEASEEEEE!! HELP ME!!

[BDSM]

I just got a T-bred 1700+. Stepping AXDA1700DLT3C - JIUHB - 0311VPMW. They say this one is not a very good overclocker but it was realy cheap so I wanna try my chances.

I need to know how to get higher than 12.5 multipliers. Can anyone please help me?
I've been searching the web for info on this but to no avail.
There is a nice guide here: http://www.overclockers.com.au/article.php?id=118669
The connect the fifth L3 bride and that supposedly unlocks the multipliers but they don't say if it's only up to 12.5!
Since I can't run higher than 166 mhz bus * 12.5 = 2083 mhz I need higher multipliers!!

Please help!!!!

ps Ia m using an Asus a7V333 board.

 

[ferrarifreak93]

can you set FSB/RAM ratio?

 

[BDSM]

At 166 and over it is onl 1:1. besides. The kt333 only has /5 divisor.. So anything over 166 mhz bus will run AGP and PCI out of spec.. And I don't want that.

Is it at all possible to unlock these higher multipliers?

 

[johncar]

Originally posted by: BDSM
At 166 and over it is onl 1:1. besides. The kt333 only has /5 divisor.. So anything over 166 mhz bus will run AGP and PCI out of spec.. And I don't want that.

Is it at all possible to unlock these higher multipliers?

http://www.beachlink.com/candjac/index.htm link to Workarounds article which addresses this issue. Other articles to understand Multiplier Code, Circuits etc as interested.
John C.

 

[BDSM]

Thank you for your help! It's much apreciated even though I am beginning to think I am too stupid to do this myself