does anyone know why my idle temps dont go below like 48.... everyones are in the lower 40's or even upper 30's... and i have the alpha 8045, 2nd best heatsink next to swifty 462.... why are they so high.. also have a Panaflo H1A 39cfm and 32db... i uninstalled the heatsink because i thought i put too few AS3 on and cleared that AS3 and added a little more than before.. still the same temps... like 50idle and 58 full load with prime...... wtf... i also have very good case cooling.. my overclocks arent that high.. only 141fsb at 1.85 volts... hmmm... i didnt pay for a 35$ heatsink for the temps to be like a stock heatsink.. anyone know what the problem is?
my room temps are around 75-80f and case temps are from 26-33 ... 33 being at full load with prime95 running and 27 being idle
also the thermistor or whatever the temp measuring probe is called sits right under the cpu core processor.. i think it touches it
... but i went into to bios and lowered the voltage from 1.85 to 1.75 and temps lowered 6 degrees.. now full load is at 52 celcius... this is still too high considering i have one of the best heatsinks .. i also removed the little cover that holds the fan on the heatsink cuz i really didnt need it.. and on the side.. i put my exhaust fan to make it intake.. now its screams
my room temps are around 75-80f and case temps are from 26-33 ... 33 being at full load with prime95 running and 27 being idle
also the thermistor or whatever the temp measuring probe is called sits right under the cpu core processor.. i think it touches it
... but i went into to bios and lowered the voltage from 1.85 to 1.75 and temps lowered 6 degrees.. now full load is at 52 celcius... this is still too high considering i have one of the best heatsinks .. i also removed the little cover that holds the fan on the heatsink cuz i really didnt need it.. and on the side.. i put my exhaust fan to make it intake.. now its screams
Facebook
Twitter