HELP

[Gbaby1008]

I was oc a little to like 190, i increased my voltage to 1.775 saved then restarted. Black screen nothin. I popped out my cmos battery, nothin, let it sit, nuthin, traded psu, video cards, memory, monitors, all nothing. I'm guessing. I fried either my mobo or cpu. But, the wierd thing is i've set it to 2.000v before. Did the same thing, fixed it by poppin the cmos battery out. And also right before it happend it was doin the same thing, and i popped out the battery like 5 times and it still works. I've also tried 2 different batteries from other computers.


Please help!!!
(No ones helpen in techs support)

Thx

 

[Oceanic]

cmos jumper?

 

[imverygifted]

ya, the moving the cmos jumper and make sure everything is unplugged

 

[AristoV300]

Make sure you switch off the PSU and unplug the power and wait like 10 minutes or so.

 

[GML3G0]

you just have to move the jumper for 1.5-2 minutes. over that isn't necessary. i timed it 😀

 

[Gbaby1008]

I did it and still same response.

 

[res0n0xg]

computer is fine, they just don't stop booting up like that. do the standard shi!t, unplug all things and take mobo outside of case with vid card cpu memory and short the power jumper with a screwdriver on the mobo and watch it come up to the bios. if that doesn't work i don't believe that you cleared the cmos properly and will never believe you unless you video tape yourself doing it.

 

[Gbaby1008]

How do u short the power jumper? And also I've switched the cmos to 2,3 and left it like that four 10 min.

 

[CaBoOse999]

I had a similar problem I though I broke something because reseting my cmos jumper wasn't doing anything until I discovered by accident that I had to Take the power plug out.

 

[Gbaby1008]

I've takin all power out too.

 

[Gbaby1008]

If it helps i have the biostar m7ncd ultra 8x

 

[Gbaby1008]

I also don't here any beeps.

 

[compusaguy]

Originally posted by: res0n0xg
computer is fine, they just don't stop booting up like that. do the standard shi!t, unplug all things and take mobo outside of case with vid card cpu memory and short the power jumper with a screwdriver on the mobo and watch it come up to the bios. if that doesn't work i don't believe that you cleared the cmos properly and will never believe you unless you video tape yourself doing it.

This is the funniest post I've read all day.

 

[Gbaby1008]

Any one else wana give it a shot, if not i'm probly gona just get a new board.