bigred2k

Member
Mar 14, 2004
59
0
0
Ok...Im having a problem and I think it might be the processor. I ordered a 3.0E processor and mobo combo from newegg. The motherboard it came with is a cheap ECS PT800CE-A. When I installed the CPU into that motherboard I kept getting a BSOD and a constant reboot. I figured maybe my boot hard drive got corrupted so I decided to put my old motherboard and the 2ghz processor back into my case to test out the rest of my hardware. It booted right up no problems. I switched back to the old motherboard and had the same problems as before. So I went back to the hot deals forum and saw the following follow-up post:

"Out of curiosity, did anyone who bought this combo get it to work? The CPU posts then just reboots constantly on mine. I'll take it back tomorrow but I'm curious if its just this board or what. Switched memory, power supplies, even monitors! I thought it was a short so I booted with the board on a desk and nothing connected but a video card and power supply, and still didnt boot without rebooting. They tried to get me to get the MSI too, and now I know why. I just wanna know if this mobo will work with this processor at all. If not, then this is pretty shady, even for Frys. Since the price was good I'll probably just chuck the board if they won't upgrade it, or exchange it for whatever combo they have tomorrow."

after seeing that I decided to get a new MOBO (since that is what I needed) I picked up a MSI 865PE Neo2-P and guess what....same issues as before. I used my g/f's digital camera to take a video of the error message I get since it only displays long enough for me to process a word or two at a time. I made a screen cap of the video (its horrible quality) but can be found here: www.manassasreallysucks.com/pictures/error.jpg It looks like the STOP ERROR is 0x00000079 or 0x0000007B both of which are explained here: http://www.theeldergeek.com/stop_error_messages.htm

Im using 2 512mb dimms of simpletech PC2100

If there is any other info you need just let me know.
 

imported_markj

Junior Member
Feb 8, 2005
14
0
0
This thread hasn't been active for a while, but I just installed one of these combos from NewEgg (P4 3.0E w/ ECS PT800CE-A mobo) and am experiencing the system freezing /hanging and then getting the BSOD with the message: *** HARDWARE MALFUNCTION CALL YOUR HARDWARE VENDOR FOR SUPPORT ***THE SYSTEM HAS HALTED***

PSU is brand new, 380w Antec. RAM is 1 yr old 2x512mb of PC2700, and passes Memtest-86 with no errors. I haven't been able to identify the problem through a web search... is there anything new on this?

Thanks,
-Mark