Help! Will not boot? What is it?

CHARLIEBORG

Senior member
Nov 16, 2000
510
0
76
I have a fatality A9N 32X. A couple weeks ago, it got to where it would not shut all the way down. Do all except power off. Now when I push the power button, it comes on for a second, then powers off . Not long enough for the it to load any thing. And the power button will not work till you unplug it, wait a second, then plug it back in. Then the power button works, but just a second then does the same thing?
Is it the power supply or mother board?
 
Last edited:

t77snapshot

Member
Apr 23, 2010
182
1
76
It could be a lot of things, your going to have to go through a series of diagnostics to find out the exact cause of the problem. Have you tried resetting your CMOS battery?
 
Last edited:

CHARLIEBORG

Senior member
Nov 16, 2000
510
0
76
Yep, tried that,cleared cmos too. changed out ram, reseated all boards in pc. I even took the cpu off and reseated it. Unplugged all drives but made no difference. Thinking its the power supply. But not sure yet. Going to try another power supply next. And other ideas?
 

stag3

Diamond Member
Feb 7, 2005
3,623
0
76
any caps busted? almost sounds like a short, but that can't be it as it was working fine prior to this
 

CHARLIEBORG

Senior member
Nov 16, 2000
510
0
76
I looked it over pretty good, did not see anything busted or shorted out. And I have not added any usb things. Not sure what else to try except buy another MB.
 

MagnusTheBrewer

IN MEMORIAM
Jun 19, 2004
24,122
1,594
126
Possible overheating? If something happened to loosen the heat sink or, the thermal compound/tape died, the mb may be shutting the system down. It only takes a second or so for the heat from an uncooled cpu to hit critical.
 

CHARLIEBORG

Senior member
Nov 16, 2000
510
0
76
It is doing this from a cold start? Wonder if the CPU is gone? How would it act if that was the case?