HELP PLZ! 250PSU sufficient for MSI KT3 ULTRA2 and XP1600? UH OH...it wont boot!

[dpk777]

is it enough?

 

[DieHardware]

What are the specs of your powersupply? If it can provide 25amps on the 5volt rail, maybe.

 

[Insidious]

might be........ borderline though. Seems like I usually see 300-350W recommended.

 

[dpk777]

Uh oh.

I went to change the frequency of the processor and when I went to reboot it didn't boot up.
So now when I turn on the comp nothing happens.
I see the fans turn on but it just doesnt boot.

Did I fry the cpu or is it that the 250psu cannot provide enough power?

plz let it be the psu...

is there any way I can get back into the BIOS and change it back to the stock frequency?

any suggestions for a PSU?

also, when it did work before I changed the frequency...my optical mouse would turn on and off as if there wasnt enough power...=/

 

[tritium4ever]

Reset the CMOS by moving the "clear BIOS" jumper to the next position (see the diagram in the manual). This will reset the BIOS to its defaults so that you can boot again.