Help osx86 install

[bingeboy]

Hi,

I'm a first time hackintosh builder.

I've been following the install instructions here since I have similar hardware:
http://forum.insanelymac.com/l.../index.php/t78325.html

After going loading boot 132 I insert the 10.5 retail dvd and start loading the os.
After about 10-15 secs of spinining on the grey Apple logo screen I get a ghost buster logo and install seems to stop.

Any ideas for trouble shooting?

sys specs:
BLOOD IRO P35-T2RL P35
CPU INTEL|C2D E7300 2.66G
GPU XFX 9800gt
HD 1T|WD
DVD BURN SAMSUNG|SH-S223F 22X
ZALMAN|9700 LED RTL

 

[Kaido]

First, have you run Memtest86+? The #1 thing to do is rule out bad RAM:

http://www.memtest.org/

6 Passes + 0 Errors = good RAM.

 

[masteryoda34]

What build of OSX86 are you using?

 

[Parasitic]

Originally posted by: masteryoda34
What build of OSX86 are you using?

I think with Boot132 you can just use the retail disc.

 

[Zaap]

BIOS settings are often key.

Make sure all your BIOS settings match those of the guide you're following. (AHCI turned on, for example.)

 

[Kaido]

Originally posted by: Zaap
BIOS settings are often key.

Make sure all your BIOS settings match those of the guide you're following. (AHCI turned on, for example.)

That plus he needs a compatible Boot132 BootCD, if it doesn't have the drivers, or at least close to the correct drivers, it won't work.

 

[Zaap]

I'd guess he'd use the boot CD in the guide he linked to- should work fine for the Blood Iron T2RL.

 

[Kaido]

Originally posted by: Zaap
I'd guess he'd use the boot CD in the guide he linked to- should work fine for the Blood Iron T2RL.

Completely missed that link :laugh: