Help!!.. on overclocking a 1.8A to 2.4GHz on a Asus P4B533-e

[PhoenixOfWater]

Ok i'll try up the volt...in really need to got to bed it 2:30AM where i am....Do you have any idea on why it wasn't leting me boot back up right away?

 

[THUGSROOK]

yes

heat = electrical resistance = less voltage = no boot for you

 

[PhoenixOfWater]

OK...I use the same setting and use the new Mem settings...and i have over_volt on....so i start it up at 18X120@CV1.60 and it boot up all find and i run Sandra and got the a little higher CPU and a little lower on Mem....and i run Prime95 for 10 min just to see if everthing was ok....next i try FSB at 125....didn't boot...wouldn't boot right up after too...so i up the CV to 1.7 and it booted but would not load windows XP...i uped the CV to 1.725 to see if that would help and it didn't....so i put the FSB at 122....samething happen.....after try diff CV from 1.6 to 1.775 and diff FSB from 121 to 128...and have the samething happen to me everthing i try a FSB of 133 and a CV of 1.8....it wouldn't boot at all.......so i wait for it to cool of and let me boot back in to the bios and i uped the cv to 1.875...it boot up and say it was run at 2400MHz but i just restated it self and would boot back in to the bios...after that i tryed 1.9 CV... samething.....so i just when back to 18X100...it working fine and running prime95 right now....

what can i do?!?...its like its mess with my head, its just show me what i want and then saying NO...you can't have that...
I am start to think its the CPU but i am going back to the store where i got the CPU i going to get some DDR333 and i may get a 1.6GHz(i can't take my old chip back) but thats ok...(i guess i want to get a 1.6 before they are all gone) have anyone have any idea what is happening...or is its the chip or my ram...should i just forget the 1.8 and get a 1.6? Plz someone replay fast..

 

[THUGSROOK]

you seem to have done it all - you are outta voltage and cant get it stable - game over.

 

[PhoenixOfWater]

Really...so should i go for the 1.6? chip.... or do you think if i get some faster DDR ram that my help?

 

[THUGSROOK]

im having a hard time following exactly what you did......

please make a chart....

110fsb 1.5v 100% stable
115fsb 1.5v 100% stable
120fsb 1.5v 100% stable
etc.

🙂

 

[SupermanCK]

me too...i got lost somewhere in the middle of that paragraph about voltage and upping fsb

 

[PhoenixOfWater]

100fsb 1.5v 100% stable 🙂
110fsb 1.5v stable
120fsb 1.5v no stable
120fsb 1.6v stable
121fsb to 124fsb 1.6v stable
anything higher at any volt no stable

 

[PhoenixOfWater]

Well i am go to the store now to ge me some new DDR2700 Ram..and hopely that will help.....