Help my plextor!!!

[Kappo]

Help guys! I have an Imation flashed to a plextor (8x20 SCSI) and here is my problem:
CloneCD- when I try to copy a CD it shows that it copied just fine, but when I put it in my CDROM to check it it doesnt even show up. This does it even when the settings are on normal and I try to copy a non copy protected CD.
EZ CD Creator- will let me create the layout and it ACTS like it is going to start the burn process...but just hangs and have to control alt del out of it.
Nero- gets ALL the way to the end of the CD and gives me the following error (from the log.txt) and the CD does not show up in the normal CD drives:

-------------------------------------------------------------------------------------------
Windows 98 4.90
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM
Nero Version: 5.0.3.1
Recorder: <PLEXTOR CD-R PX-R820T> Version: 1.07 - HA 0 TA 0 - 5.0.3.1
Adapter driver: <symc8xx> HA 0
Drive buffer : 4096kB
CD-ROM: < ATAPI 44X CDROM> Version: 3.10 - HA 3 TA 0 - 5.0.3.1
Adapter driver: <ESDI_506
> HA 3
ATAPI 44X CDROM (Target 0, F: ): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
PLEXTOR CD-R PX-R820T (Target 0, E: ): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130504kB)
Free physical memory: 19MB (19504kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Wizard: Off

CD-ROM (ISO)
7.11.2000

3:14:30 AM #1 Text 0 File Reader.cpp, Line 106
Reader running

3:14:30 AM #2 Text 0 File Writer.cpp, Line 108
Writer PLEXTOR CD-R PX-R820T running

3:14:30 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3236
First writeable address = 0 (0x00000000)

3:14:30 AM #4 Text 0 File ThreadedTransferInterface.cpp, Line 630
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 130179 (130179) = #130179/28:57.54
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

3:14:34 AM #5 Text 0 File Burncd.cpp, Line 1607
Recorder: PLEXTOR CD-R PX-R820T;
CDR code: 00 00 00 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 18 01, 3: 4A 2B 00
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

3:14:34 AM #6 Text 0 File ThreadedTransferInterface.cpp, Line 762
Prepare recorder PLEXTOR CD-R PX-R820T for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC &quot;&quot;, FilePos 0 307200 266913792

3:14:34 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 790
Removed 2 run-out blocks from end of track 1.

3:14:34 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 630
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 130179 (130179) = #130179/28:57.54
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 130177 blocks [PLEXTOR CD-R PX-R820T]
--------------------------------------------------------------

3:14:34 AM #9 Phase 24 File dlgbrnst.cpp, Line 1193
Start of caching files

3:14:36 AM #10 Phase 25 File dlgbrnst.cpp, Line 1193
Caching files completed

3:14:36 AM #11 Phase 28 File dlgbrnst.cpp, Line 1193
Start of speed measurement

3:14:36 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1704
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

3:15:09 AM #13 Text 0 File ThreadedTransfer.cpp, Line 205
all writers idle, stopping conversion

3:15:10 AM #14 Phase 29 File dlgbrnst.cpp, Line 1193
Speed measurement done: 49x (7468 KB/s)

3:15:10 AM #15 Phase 32 File dlgbrnst.cpp, Line 1193
Start of simulation at 8x (1200 KB/s)

3:15:10 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1704
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

3:18:51 AM #17 Text 0 File ThreadedTransfer.cpp, Line 205
all writers idle, stopping conversion

3:18:53 AM #18 Phase 33 File dlgbrnst.cpp, Line 1193
Simulation done successfully at 8x (1200 KB/s)

3:19:06 AM #19 Phase 36 File dlgbrnst.cpp, Line 1193
Start of burnprocess at 8x (1200 KB/s)

3:19:06 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 1704
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

3:22:58 AM #21 Text 0 File ThreadedTransfer.cpp, Line 205
all writers idle, stopping conversion

3:22:59 AM #22 SCSI -1066 File Cdrdrv.cpp, Line 1144
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

3:22:59 AM #23 mmc 9216 File ThreadedTransferInterface.cpp, Line 1401
Invalid field in CDB

3:22:59 AM #24 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 1401
Could not perform EndTrack

3:23:27 AM #25 Phase 38 File dlgbrnst.cpp, Line 1193
Burnprocess failed at 8x (1200 KB/s)

3:23:27 AM #26 Text 0 File Scsicmd.cpp, Line 308
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

3:23:27 AM #27 Text 0 File WinNeroThreads.cpp, Line 909
Thread priorities:
Pri. name -> class / level
0. Idle -> 32 / -15 = default
1. Background -> 32 / -2 = default
2. Normal -> 32 / 0 = default
3. HighIdle -> 128 / -1 = default
4. High -> 128 / 0 = default
5. Higher -> 128 / 1 = default
6. Realtime -> 128 / 2 = default


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 8, size=30887 bytes, created 11/7/2000 3:04:52 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 4/10/2000 7:10:56 AM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM
---------------------------------------------------------------------------------------------

SOMEONE PLEASE TELL ME WHAT IS WRONG!!!
THanks!!! I need to get some of this crap off my HD!!!!

 

[blargyblarg]

has it ever worked correctly since you flashed it? you could try flashing it back to an Imation if possible.

 

[Kappo]

ok I tried that...but it doesnt seem to make any difference...it only changes the way the drive is named....any other suggestions?? PLEASE help as I need this thing to work
THANKS!!

 

[Kappo]

anyone?? I can read CD's just fine!!!! just not write them....

 

[Kappo]

help!!

 

[Remedy]

Did you at least download the newest version to CLoneCD and Nero from cdmediaworld.com?

 

[Kappo]

YEP!!! I have the newest versions of EVERYTHING...I was mostly worried that the drive has something wrong with it...I am looking into an RMA I guess because I just cant get it to work...Ive used about 20 or so CD's trying...

 

[Kappo]

anyone got any ideas??? PLEASE?!?!?!?!

 

[Sir Fredrick]

Make sure you have aspi installed correctly. Also, can the plextor read the CDs it's burned?

 

[ISH]

Make sure you are closing the cd when you burn it so that the cd-r can be read by cd-rom drives.

 

[Cable]

are you using warez versions of the software? i heard somewhere that if you use a warez version that it will burn sucessfully but when you load it itll just say that theres nothing on the cd.

 

[Kappo]

Sir Fredrick: mmmm I will look into that...I didnt install aspi at all so I am going to check that.

ISH: no...none of the CD's I have burned wonk at all...wont even get recognized in ANY CDrom that I put them in.

Cable: While I am sure some warez work, I own EVERYTHING I am trying to copy.