Help!! - my athlon 1ghz is running at 48 degrees C....

[Steelo]

Hiya... i have recently brought an Athlon socket a 1GHZ & abit kt7-raid combo. I am using a Coolermaster Copper heatsink and fan and yesterday, checked the tempreture of the cpu, and its running at 48 C.. the machine had been running all day, but all the same, i am a bit worried... I hear that athlons run hot anyway so i shouldnt worry too much. However, i am worried in case i fry my new proc. Also, the system temp was about 28 C at the same time... any idea's?

Cheers

Steelo

 

[jinsonxu]

It's normal. Don't worry too much. As long as it's below 50-55 degrees, i wouldn't worry.

 

[moolman]

My 1.1gig runs at 48-52C at a full load, if it hits above 60C start throwing some water at it. 🙂

Alex

 

[KJY9]

two t-birds running 1Ghz on A7V's ... 98 - 111 F with the standard heatsink and fan that came with the cpus.

 

[pillage2001]

Don't worry man, I hit 60+ all the time before I got my FOp32. 😉

 

[Teatowel]

As long as your system is stable, stop worrying!

 

[Rigoletto]

Don't be so WET. Do you know what 48C is?- 60C is the hottest water your body can take (externally), above is scalding. 48C is only 11 above your body temperature. It will feel nice and warm, that's all.

*BTW that coolermaster has got bad reviews. You could cool your processor more with most a GlobalWin, Alpha, Taisol....

 

[Steelo]

hey all,

thanks for the info... i didnt really know what sort of cpu temp i should be expecting - i was alarmed because the abit monitoring software sets an alarm when the temp hits 50C - Now i guess thats a default value of no importance... Once again.. thanks for your help!

Steelo

 

[vvvvvv]

thats a good temp

 

[Mem]

Steelo ,My own 900mhz T-bird temp is between 42c & 47c for full load so your temp is fine, you could had some case cooling fans like Sunon 80 mm if you want extra cooling.

🙂