Help me with this BS.

[Anarchist420]

My Microsoft Xbox360 wireless controller won't work. The receiver (plugged into a working USB port) doesn't recognize it no matter how many times I press the damn sync button on the controller and even on the receiver. The controller gives a response to holding the sync button down, but the whole ring just starts flashing after the ring going in a circle.

I've tried 3 different pairs of batteries, so that's not the issue.

Please help me!

 

[KentState]

You need to hold the sync button on the receiver after the controllerstarts blinking all four lights. If it syncs, the lights on the controller will cycle a couple times and then will stay on the first position.

 

[UberNeuman]

Your Wireless receiver may have a broken fuse.

I had the same problem and used this guide to repair it.

 

[chimaxi83]

Broken fuse, or try a different USB port.

 

[Anarchist420]

You need to hold the sync button on the receiver after the controllerstarts blinking all four lights. If it syncs, the lights on the controller will cycle a couple times and then will stay on the first position.

Thanks That's what I was doing. The fuze is broken apparently.

 

[gorcorps]

Your Wireless receiver may have a broken fuse.

I had the same problem and used this guide to repair it.

Nice, mine randomly stopped working about a month ago so this probably explains it.

 

[darkewaffle]

Do you have the driver/tool thingy installed?

 

[Anarchist420]

Do you have the driver/tool thingy installed?

Yes, it's the fuse.