• We should now be fully online following an overnight outage. Apologies for any inconvenience, we do not expect there to be any further issues.

HELP! IRQL error installing Windows XP Pro. Now w/ error codes.

Techie333

Platinum Member
Jan 20, 2001
2,368
0
0
I get an IRQL_NOT_LESS_OR_EQUAL error when installing windows xp everytime. First i though it was because my hard drive was partitioned into two, so i unpartitioned and put it all on one drive, but i still get the error w/ blue screen.

Here is the Technical Information:

*** STOP: 0x0000000A (0xFFBE0000, 0x00000002, 0x00000000, 0x807D4AD4)

what the hell is this error......i tried installing xp like 10 times now and everytime i still get this error!!
 

linuxboy

Elite Member
Oct 9, 1999
2,577
6
76
check your ACPI and power management stuff in bios, might need a bios flash/update.

also disable all shadowing, then tell me how it goes.


Cheers ! :)
 

Techie333

Platinum Member
Jan 20, 2001
2,368
0
0
I am just quiting now and reinstalling windows 98 se. I am so fed up w/ microsoft.........

I tried switching both modules of ram and installing xp again and it still did not work so it wasn't the ram......i tried it w/o the modem....not modem...............i stopped there..........

as for the bios update, i can't even find the motherboard manufacturer's website....its a Camaro motherboard w/ VIA chipset and AMD K6-2 533mhz...........compaq 7478.............
 

linuxboy

Elite Member
Oct 9, 1999
2,577
6
76
Disable ACPI and see if it works. THis is a tough one, but in the past, it has been that issue in installs I've done.

Cheers ! :)
 

Moonbeam

Elite Member
Nov 24, 1999
74,750
6,764
126
Man oh man, if anybody ever dared to tell me to disable my ACPI the first think I'd do is respond with a vicious HOW?
 

linuxboy

Elite Member
Oct 9, 1999
2,577
6
76
Originally posted by: Moonbeam
Man oh man, if anybody ever dared to tell me to disable my ACPI the first think I'd do is respond with a vicious HOW?

get into bios (usually delete or F1 during the initial boot screen) and it is usually under the chipset section in the power management option. Should be able to select ACPI, APM or none.

Cheers ! :)
 

XZeroII

Lifer
Jun 30, 2001
12,572
0
0
am just quiting now and reinstalling windows 98 se. I am so fed up w/ microsoft.........
lol, just blame it on Microsoft, hu? Most likely the problem is an incompatible driver trying to be installed. I got the same thing when trying to install XP with some bad RAID drivers. Based off the error codes, I would guess (keyword is guess) that it's a problem with a video card driver. A conflict with the hal.dll file. I got this from the 0x807D4AD4 error code. hal.dll usually is associated with video I think. Maybe this will help a bit.