Help! How to unlock duron 1.3

[OverVolt]

as title says i tried connecting all the L1 bridges with a pencil to no avail. it would boot with the normal multiplier and when i tried to adjust it via jumper the system would not boot. i tried 108fsb but i want 133bus @ 10.5 multiplier since my board only has a 1:1 mem ratio. that would put pci back into spec. sys stats

GA-7DX+
duron1.3
samsung pc2100 ddr
300w antec psu

 

[TheHunter]

The pencil trick is the best way... are u sure u connect all the bridges as needed?
If yes, try with another pencil...