bryanW1995
Lifer
- May 22, 2007
- 11,144
- 32
- 91
OP I would look into what you can do in terms of mounting some 120mm fans into that case if it supports it.
At a minimum if you can get a 120mm taking in air at the front and another 120mm expelling air at the back that will help.
Try to get some decent high rpm fans that can push air since you will only be using two
http://ncix.com/products/index.php?s...facture=Scythe
http://ncix.com/products/index.php?s...facture=Scythe
Of course this will likely just offset fan speed from your card to the case fansBut some airflow will help, the first fan I linked is really loud, the second not so much.
I doubt you have a defective card, if you are not experiencing lockups or issues with the card. These cards get hot is all and once they get hot, they get loud.
90% fan speed must be pretty obnoxious. My cards will go to about 75% fan under load and I find that too loud.
yes, 2x80mm isn't going to cut it with that rig. I used to go with the cheapie cases, but since I went to an antec 900 or 3 there's no going back for me. 3x120mm and 1x200mm? what's that you say, they also come with manual fan speed adjustment? yes, thank you.