grr.. MSI 6163 Pro and 8.5x mulitplier, overclocking....

[randomlinh]

Anyway to get this? Using the latest bios, a celery 566 that i got from compuwiz that will do 850.

Using an MSI Slocket, 6905 Master. 1.6v is the setting on the card, cpu detect speed.

If i force 100mhz, comp will not boot. If i do auto detect, i can't change the multiplier to 8.5 in the bios (not there) so i can force 100mhz...

GRRRR... anyway around this??

 

[Klosters]

Modern Chipzilla CPU's dictate their fixed multiplier to the Bios. Whatever is set in Bios doesn't mean anything to the CPU. I'm sure there is a way to let your Bios "know who's boss," but I'm not familiar with your motherboard.

 

[Tonec]

Set multiplier in bios to 8.0, up voltage to probably 1.7-1.8 and set fsb to 100 via slocket jumpers or in bios. Disable speed error hold.

 

[compuwiz1]

There is no speed error hold on the MSI 6163 pro. We are working on it, we think the chip may have gotten jarred during shipping.

 

[Wixer]

MSI6163Pro with latest bios should have multiplier up to 9.5 which is what i have after i updated my BX Master with the latest 5.3 bios.

Wixer