Got trouble installed Visiontek GF4 TI 4600

[jsouth]

To all expert . Please help.
I got Visiontek GF4 TI 4600 and try to install but got error said " This device can not start (code 10) . Which is I really don't know what is CODE 10. I did following instruction from manual came with the card. I check IRQ using 11 no conflict. When go back to GF3 original it just work fine. I don't know what's wrong.

Here my sys:
MOBO: Abit KR7A_RAID
CPU : AMD Athlon XP 1800+
PSU : Antec PP-403X 400W
MEM : 512MB DDR PC2100 crucial
SOUND: Audigy gamer
NIC : Linksys 10/100
HDD : 2 of 30GB Maxtor setting raid0
CD-RW: 30x10x40 tdk velocd
DVD : pioneer 16x
O.S : WindowXP Pro

 

[artemedes]

Just a guess. But when I first got my Ti4400 I noticed that I could not run it at an agp aperture of 256 mb.

I have a K7S5A mb, but I have read at NVnews.net forum that a few people with both 4400s and 4600s
have had best luck with an aperture size of 64mb. Mine seems to run the same at both 64 and 128,
and I can get into windows at 256, but can't run certain 3d apps at 256.

I would set it at 64mb and see what happens. Your motherboard may react differently and I think
this issue has more to do with gf4 ti's than mbs.

Hope that helps.