• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

FX-55 with NEO2, what setting would be better

D

DragonFire

Golden Member
All Id like to know is which of the following settings would be best to run at and why..

10x300Mhz, HT=4X, MEM=5:4
or
11x266MHz, HT=3X, MEM=1:1
 
first off I doubt your HT can run at 300*4

imo the 300x11 would be faster to to 66 extra mhz, the extra memory bandwidth wouldn't help all that much.
 
You could likely run the 4x with the 266 but not the 300.....Though 3x 300 wont make any real difference....
 
the hyper transport speed is suppossed to stay between 1000mhz and 800mhz, so running a 300hmz FSB at HT of 4x would most likely be unstable. A64's don't get a huge benefit from extra memory speed, so i'd just go with whichever has the higher CPU speed/
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top