FSB question

[Neos]

Hi all...
Finally got my 128 Mg. of Micron PC133, and have the FSB up to 105 ...so it is 105x8=824 w/1.65 v on the Pro 2 MSI (Duron 650)
I need a quick lesson on what this is doing to my hard drive, AGP card, etc. I think I know that they are running at 1/3 ..is that right?
How high can I go safely? I think I have seen some out there going to much higher FSB with the Pro 2 ...so I will try, if it is safe.
One note..it seemed that by going up one step at a time, I was able to get it here. Initially I tried to go straight to 107 ...no dice. Any comment on that?
Thanks for any and all help.
Neos

 

[Tachyon]

You appear to have hit the FSB limit, if not with the chip then at least the way you are set up. Your PCI divider is 1/3. Not knowing the rest of your setup, it's impossible to tell if they may have a problem with the higher PCI freq. You may want to up your voltage a little and see if that helps.

 

[Neos]

I have a Maxtor 8.3 G HD (UDMA33), and the ATI Rage Fury 16 Mg.(AGP).
You say I am at the max on FSB? I thought I have seen folks go higher.
??
Thanks
Neos

 

[Tachyon]

Not everyone has exactly the same periphials, environment, etc. You may be able to go higher with more than 1.65v.