• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

FSB question

N

Neos

Senior member
Hi all...
Finally got my 128 Mg. of Micron PC133, and have the FSB up to 105 ...so it is 105x8=824 w/1.65 v on the Pro 2 MSI (Duron 650)
I need a quick lesson on what this is doing to my hard drive, AGP card, etc. I think I know that they are running at 1/3 ..is that right?
How high can I go safely? I think I have seen some out there going to much higher FSB with the Pro 2 ...so I will try, if it is safe.
One note..it seemed that by going up one step at a time, I was able to get it here. Initially I tried to go straight to 107 ...no dice. Any comment on that?
Thanks for any and all help.
Neos
 
You appear to have hit the FSB limit, if not with the chip then at least the way you are set up. Your PCI divider is 1/3. Not knowing the rest of your setup, it's impossible to tell if they may have a problem with the higher PCI freq. You may want to up your voltage a little and see if that helps.
 
I have a Maxtor 8.3 G HD (UDMA33), and the ATI Rage Fury 16 Mg.(AGP).
You say I am at the max on FSB? I thought I have seen folks go higher.
??
Thanks
Neos
 
Not everyone has exactly the same periphials, environment, etc. You may be able to go higher with more than 1.65v.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top